FOR HYDRO TRACTORS
INCLUDES RING GEAR
FOR 12" FLYWHEELS WITH 132 TEETH; DIESEL ONLY
REQ. FOR INSTALLATION OF 528707 RING GEAR/PINION AND 120265 RING GEAR/PINION UPDATE KIT
REQ. WHEN ORDERING PART NUMBER 9203
RING GEAR & PINION / DIFFERENTIAL
TOP COVER PRESSURE PORT
OPTION FOR 386867 O-RING
SPLIT O-RING 1 1/4" ID
WITH NUT, KEY & O-RINGS
W/NUT, KEY AND O-RINGS NOT COMPATIBLE WITH PIGGY BACK PUMP
2500 PSI
2300 PSI
2000 PSI
FITS: 7031, 70932, 70933 & 70935
FITS: 70931 NEW, 70932 NEW, 70933 NEW & 70935 NEW
HITCH PUMP GASKET
COMPLETE OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS, CLUTCH PACK AND BRAKE PISTONS. FOR UNITS WITH SPRING ACTIVATED BRAKES
OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK. DOES NOT INCLUDE BRAKE PISTONS FOR UNITS WITH SPRING ACTIVATED BRAKES
COMPLETE GASKET, O-RING & SEAL PACKAGE FOR UNITS WITH SPRING ACTIVATED BRAKES
COMPLETE GASKET, O-RING & SEAL PACKAGE WITH HEAVY DUTY CLUTCH DRUM SEAL RINGS FOR UNITS WITH SPRING ACTIVATED BRAKES
GASKET & O-RING PACKAGE FOR CLUTCH DRUM SERVICE ONLY
INCLUDES: CAST CLUTCH DRUM SEAL RINGS
CONTAINS: 12 STEEL PLATES & 5 FIBER PLATES
CONTAINS: 9 STEEL PLATES & 7 FIBER PLATES
CONTAINS: 10 INTERNAL TOOTH & 10 EXTERNAL TOOTH FRICTION PLATES
FOR USE WITH SPRING ACTIVATED BRAKES
INCLUDES: CONTROL VALVE GUIDE, CONTROL VALVE GUIDE STEM & CONTROL VALVE DOWEL FOR SINGLE & DUAL SPEED PTO UNITS WITH SPRING APPLIED BRAKES
CONTROL VALVE SEAL
CONTROL VALVE SEAL PLUG ORING FITS UNITS WITH HYDRAULIC AND SPRING APPLIED BRAKES
PTO CLUTCH DRUM RETAINING SNAP-RING
FOR 1000 RPM SHAFT
FOR 540 RPM SHAFT
BEARING RETAINING RING
PTO IDLER GEAR - DUAL SPEED ONLY
540 SHAFT DRIVEN GEAR - DUAL SPEED ONLY
SPACER FOR 540 SHAFT DRIVEN GEAR - DUAL SPEED ONLY
540 & 1000 RPM REAR PTO OUTPUT SHAFTS
PTO IDLER SHAFT - DUAL SPEED ONLY
IDLER GEAR THRUST WASHER - DUAL SPEED ONLY - 2 REQUIRED
PTO UNIT TO TRACTOR
INCLUDES: SEAL, EXTERNAL REPAIR FOR 540 RPM SHAFT SEAL LEAKAGE
FOR UNITS WITH SPRING APPLIED BRAKES 3 REQUIRED
FOR UNITS WITH SPRING APPLIED BRAKES, (NEW AVAILABLE) 3 REQUIRED
FOR CONTROL VALVE
FITS: 540 RPM AND 1 3/8" 1000 RPM SHAFTS 2 REQUIRED
TEFLON CLUTCH DRUM SEAL RING
CAST CLUTCH DRUM SEAL RING HD OPTION FOR 381485
CLUTCH DRUM TO SHAFT O-RING
CLUTCH PISTON INNER O-RING
PTO CLUTCH FRICTION DISC Required: 5 FOR OEM CLUTCH PACK OR 7 FOR HEAVY DUTY CLUTCH PACK
HD OPTION FOR 381490 Required: 5 FOR OEM CLUTCH PACK OR 7 FOR HEAVY DUTY CLUTCH PACK
51 INTERNAL TEETH WITH FRICTION MATERIAL ON 1 SIDE CAN ONLY BE USED WITH 1863971
6 EXTERNAL TABS WITH FRICTION MATERIAL ON 1 SIDE CAN ONLY BE USED WITH 1863972
INCLUDES: HUB, 8 FIN IMPELLER & MOUNTING GASKET
INCLUDES: HUB, 4 FIN IMPELLER AND MOUNTING GASKET CAN USE 672644 WATER PUMP W / 8 FIN IMPELLER
INCLUDES: DRIVE GEAR, THRUST PLATE & 12 NEW 1" LIFTERS
INCLUDES: DRIVE GEAR, THRUST PLATE & 12 NEW 1 1/8" LIFTERS
INCLUDES: DRIVE GEAR AND THRUST PLATE; ORDER LIFTERS
W/O GEAR, ORDER LIFTERS SEPARATELY
1 1/8" Required: 12
1" Required: 12
FOR INSTALLATION OF 1809964 REAR MAIN SEAL
OUTER
INNER Required: 1 PER SIDE
24 SPLINES
24 SPLINES WITH NUT AND BOLT
REAMER RENTAL IS AVAILABLE FROM AG PARTS, LTD.
REQ. FOR INSTALLATION OF 830411 PIN KIT
REQ. WHEN ORDERING PART NUMBER 9206
FOR INSTALLATION OF 830411 PIN KIT
CAN USE 990-358 - ALTERNATE VERSION; ORDER 451-6265K TO REPLACE ORIGINAL SERVICE VALVES, UNIVERSAL KIT - USE FOR FLARE & O-RING APPLICATIONS.
CAN USE 990-357 - OE SANDEN; ORDER 451-6265K TO REPLACE ORIGINAL SERVICE VALVES, UNIVERSAL KIT - USE FOR FLARE & O-RING APPLICATIONS.
4" x 6 3/4" MALE FLARE, FRONT MOUNT CAN USE HEAVY DUTY DRY-TECH SERIES 804-505