INTERNATIONAL 1086 International Models: 1026 thru 1680

GREASEABLE

KIT INCLUDES: PPA, 6 PAD DISC, RELEASE & PILOT BEARINGS; FLYWHEEL STEP 1.938"

INCLUDES: PPA, 6 PAD DISC, AETNA RELEASE BEARING & PILOT BEARING;
FLYWHEEL STEP 1.938"

INCLUDES: PPA (HYDRAULIC CLUTCH ASSIST SUGGESTED), HEAVY DUTY 6 PAD DISC, RELEASE & PILOT BEARINGS
FLYWHEEL STEP: 1.938"

INCLUDES: PPA (HYDRAULIC CLUTCH ASSIST SUGGESTED), HEAVY DUTY 6 PAD DISC, AETNA RELEASE BEARING, PILOT BEARING
FLYWHEEL STEP 1.938"

INCLUDES: PPA (HYDRAULIC CLUTCH ASSIST SUGGESTED), HEAVY DUTY 8 PAD DISC, RELEASE & PILOT BEARINGS FLYWHEEL STEP: 1.938"

INCLUDES: PPA (HYDRAULIC CLUTCH ASSIST SUGGESTED), HEAVY DUTY 8 PAD DISC, AETNA RELEASE BEARING, PILOT BEARING
FLYWHEEL STEP: 1.938"

INCLUDES: PPA (HYDRAULIC CLUTCH ASSIST SUGGESTED), 8 REGULAR PAD DISC, RELEASE & PILOT BEARINGS
FLYWHEEL STEP 1.938"

FLYWHEEL STEP 1.938"
(NEW CAST OR NEW AVAILABLE)

FLYWHEEL STEP 1.938"

FLYWHEEL STEP 1.938"

FLYWHEEL STEP 1.938"

FOR TRACTORS WITH HYDRAULIC CLUTCH ASSIST
HEAVY DUTY
FLYWHEEL STEP 1.938"
(67597 NC WITH NEW CAST OR 67597 NEW AVAILABLE)

HEAVY DUTY
FOR TRACTORS WITH HYDRAULIC CLUTCH ASSIST.
FLYWHEEL STEP: 1.938"

HEAVY DUTY
FOR TRACTORS WITH HYDRAULIC CLUTCH ASSIST.
FLYWHEEL STEP: 1.938"

FOR TRACTORS WITH HYDRAULIC CLUTCH ASSIST.
FLYWHEEL STEP: 1.938"

HEAVY DUTY
FOR TRACTORS WITH HYDRAULIC CLUTCH ASSIST.
FLYWHEEL STEP: 1.938"

HEAVY DUTY
FOR TRACTORS WITH HYDRAULIC CLUTCH ASSIST.
FLYWHEEL STEP: 1.938"

(NEW AVAILABLE)

(NEW AVAILABLE)

INCLUDES: RELEASE BEARING & RELEASE BEARING CARRIER

INCLUDES: AETNA RELEASE BEARING & RELEASE BEARING CARRIER

GREASABLE

GREASEABLE

GREASABLE
AETNA BEARING

GREASABLE
FITS: TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED
INCLUDES: RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, IPTO FRONT & REAR SEALS

FITS: TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED
INCLUDES: GREASEABLE AETNA RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, FEDERAL MOGUL FRONT & REAR IPTO SEALS

FITS: TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED
INCLUDES: GREASEABLE RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, FEDERAL MOGUL FRONT & REAR IPTO SEALS

GREASABLE
FITS FACTORY NON-TA TRACTORS
INCLUDES: RELEASE BEARING, PILOT BEARING, BUSHING, TA O-RING & IPTO FRONT & REAR SEALS

INCLUDES: RING GEAR
ALSO, FITS: 966 & 986 WHEN CONVERTING TO 14" CLUTCH

FITS: 14" FLYWHEEL ONLY

GREASEABLE

KIT INCLUDES: NEW CLUTCH SHAFT, RELEASE FORK, RELEASE BEARING & RELEASE BEARING CARRIER

INCLUDES: RELEASE BEARING & RELEASE BEARING CARRIER

INCLUDES: AETNA RELEASE BEARING & RELEASE BEARING CARRIER

GREASABLE

GREASEABLE

GREASABLE
AETNA BEARING

FITS TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATION KIT INSTALLED.
KIT INCLUDES IPTO: SHAFT, BEARING, BEARING CAGE, BEARING CAGE O-RING & FRONT & REAR SEALS

FITS TRACTORS WITH TA OR THAT HAVE HAD TA ELIMINATION KIT INSTALLED
KIT INCLUDES: IPTO SHAFT, BEARING, BEARING CAGE, BEARING CAGE O-RING & FEDERAL MOGUL FRONT & REAR IPTO SEALS

FITS TRACTORS WITH OR WITHOUT TA

FITS TRACTORS WITH TA OR THAT HAVE HAD TA ELIMINATOR INSTALLED

FITS TRACTORS WITH TA OR THAT HAVE HAD TA ELIMINATOR INSTALLED

BALL TYPE

ROLLER TYPE

FITS TRACTORS WITHOUT TA

FITS TRACTORS WITH TA

FITS TRACTORS WITH TA
INCLUDES: 1 - 535208, 1 - 535209 & 1 - 22414

FITS TRACTOR WITH TA

KIT CONTENTS:
535208R92 DOUBLE SHELL SEAL, 535209R92 DOUBLE SHELL SEAL & 22414 ORING (BEARING CAGE)

FITS TRACTORS WITH TA
INCLUDES: 1 - 535208FM FEDERAL MOGUL SEAL, 1 - 535209FM FEDERAL MOGUL SEAL & 1 - 22414 BEARING CAGE O-RING

FITS: FACTORY NON-TA TRACTORS
INCLUDES: 1 - 535208, 1 - 535209 & 1 - 22419
DOES NOT INCLUDE BUSHING

FITS FACTORY NON-TA TRACTORS;
INCLUDES: 1-535208, 1-535209, 1-22419 & 1-384185

FITS TRACTORS WITH TA

FITS TA HOUSING OR FACTORY NON-TA BEARING CAGE

INNER
FITS TRACTORS WITH OR WITHOUT TA

INNER
FITS TRACTORS WITH OR WITHOUT TA
DOUBLE SHELL SEAL

FEDERAL MOGUL REAR/INNER IPTO SEAL
FITS TRACTORS WITH OR WITHOUT TA

FRONT/OUTER
FITS TRACTORS WITH OR WITHOUT TA

FRONT/OUTER
FITS TRACTORS WITH OR WITHOUT TA
DOUBLE SHELL SEAL

FEDERAL MOGUL FRONT/OUTER IPTO SEAL
FITS TRACTORS WITH OR WITHOUT TA

3 YEAR WARRANTY ON TA ONLY
INCLUDES: TA, GASKETS, QUILL, MCV PUMP & LOWER GEAR

KIT INCLUDES:
TA
GASKET KIT
QUILL
MCV PUMP
LOWER GEAR
5 YEAR WARRANTY

3 YEAR WARRANTY, OEM
3 DIRECT DRIVE DISCS & 2 ANTI-FREE WHEEL DISCS
INCLUDES: LOWER GEAR

HEAVY DUTY
5 YEAR WARRANTY
4 DIRECT DRIVE DISC & 2 ANTI-FREE WHEEL DISC
INCLUDES: LOWER GEAR

6 YEAR WARRANTY
HEAVY DUTY
4 DIRECT DRIVE DISC AND 3 ANTI-FREE WHEEL DISC
INCLUDES: LOWER GEAR

6 YEAR WARRANTY HEAVY DUTY REQUIRES THE USE OF A PULLER IPTO SHAFT 4 DIRECT DRIVE DISC AND 3 ANTI-FREE WHEEL DISC INCLUDES: LOWER GEAR

MCV OR STEERING HYDRAULIC PUMP

INCLUDES: INNER BEARINGS PRE-INSTALLED

FOR TA INSTALLATION
INCLUDES: 393877 MCV OVERHAUL KIT

FOR TA INSTALLATION
INCLUDES: 393877 MCV OVERHAUL KIT
FEDERAL MOGUL IPTO SEALS

NOTE: FLAT SIDE GOES TO TA

KIT INCLUDES:
3-PAPER DISCS
1-METALLIC DISC

INCLUDES: 30 - .015" TA SHIMS

INCLUDES: 30 - .032" TA SHIMS

INCLUDES: 15 - .015" TA SHIMS & 15 - .032" TA SHIMS

USED TO ALIGN CONSTANT MESH GEARS WHEN SHIMMING TA
INCLUDES: 12 - .024 & 12 - .044 THICK SPACERS

REPLACEMENT SHAFT FOR TA ELIMINATED AND OEM NON-TA TRACTORS
INCLUDES: INNER BEARING PRE-INSTALLED

FITS TRACTORS WITHOUT TA

529434 SPEED TRANSMISSION MAIN SHAFT ALSO REQUIRED IF EXISTING MAIN SHAFT IS NOT DRILLED THROUGHT CENTER

529434 SPEED TRANSMISSION MAIN SHAFT ALSO REQUIRED IF EXISTING MAIN SHAFT IS NOT DRILLED THROUGHT CENTER

FOR TA INSTALLATION
INCLUDES: 393877 MCV OVERHAUL KIT

FOR TA INSTALLATION
INCLUDES: 393877 MCV OVERHAUL KIT
FEDERAL MOGUL IPTO SEALS

MUST POSITIVELY IDENTIFY TOOTH DEGREE.

FITS APPLICATIONS WITH OR WITHOUT TA

INCLUDES: INNER BEARINGS PRE-INSTALLED

REPLACEMENT SHAFT FOR TA ELIMINATED AND OEM NON-TA TRACTORS
INCLUDES: INNER BEARING PRE-INSTALLED

LEFT HAND THREAD, REQUIRES THE ADDITION OF ONE 71147C1 SPLINED FRONT SPACER, IF ONE IS NOT ALREADY BEING USED

LEFT HAND THREAD
HEAVY DUTY THICK WALL
REQUIRES THE ADDITION OF ONE 71147C1 SPLINED FRONT SPACER, IF ONE IS NOT ALREADY BEING USED

SPLINED FRONT SPACER

COUNTERSHAFT CONSTANT MESH GEAR STOP

LEFT HAND THREADS, USED WITH 148951 AND 380082 LH COUNTERSHAFTS

RIGHT HAND THREADS

USED WITH 380092 RIGHT HAND NUT

REQ. FOR INSTALLATION OF 528707 RING GEAR/PINION AND 120265 RING GEAR/PINION UPDATE KIT

REQ. WHEN ORDERING PART NUMBER 9203

SINGLE HOLE, INCLUDES: GASKET

FOR SPEED TRANSMISSION

INCLUDES: O-RING

MADE IN USA
INCLUDES: CONTROL ARM, ROLLER & SPRING

2 REQ. FOR RANGE TRANSMISSION, 3 REQ. FOR SPEED TRANSMISSION

INCLUDES: MISC. PLUGS AND GASKET
FILLER TUBE NOT INCLUDED

MADE IN USA

FOR RANGE TRANSMISSION

FOR RANGE TRANSMISSION
MADE IN USA

FITS TRACTORS WITH MECHANICAL TRANSMISSION BRAKE

FOR TRACTORS WITH MECHANICAL TRANSMISSION BRAKE

RING GEAR & PINION / DIFFERENTIAL

TOP COVER PRESSURE PORT

OPTION FOR 386867 O-RING

FOR TA INSTALLATION
INCLUDES: 393877 MCV OVERHAUL KIT

FOR TA INSTALLATION
INCLUDES: 393877 MCV OVERHAUL KIT
FEDERAL MOGUL IPTO SEALS

SPLIT O-RING
1 1/4" ID

SPLIT O-RING
1 1/2" ID

TRANSMISSION BRAKE SHAFT O-RING

MCV OVERHAUL KIT; INCLUDES: MCV GASKETS, SPRING KIT & O-RING KIT
FOR TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED
DOES NOT FIT FACTORY NON-TA TRACTORS.

.015 THICK

.023 THICK

FOR TA SELECTOR VALVE

FITS TRACTORS WITH TA

FITS TA HOUSING OR FACTORY NON-TA BEARING CAGE

FRONT/OUTER
FITS TRACTORS WITH OR WITHOUT TA

FEDERAL MOGUL FRONT/OUTER IPTO SEAL
FITS TRACTORS WITH OR WITHOUT TA

FRONT/OUTER
FITS TRACTORS WITH OR WITHOUT TA
DOUBLE SHELL SEAL

INNER
FITS TRACTORS WITH OR WITHOUT TA

FEDERAL MOGUL REAR/INNER IPTO SEAL
FITS TRACTORS WITH OR WITHOUT TA

INNER
FITS TRACTORS WITH OR WITHOUT TA
DOUBLE SHELL SEAL

MCV OR STEERING HYDRAULIC PUMP

FITS: MCV PUMP

FITS: 70931 NEW, 70932 NEW, 70933 NEW & 70935 NEW

MCV OVERHAUL KIT; INCLUDES: MCV GASKETS, SPRING KIT & O-RING KIT
FOR TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED
DOES NOT FIT FACTORY NON-TA TRACTORS.

.015 THICK

.023 THICK

FOR TA SELECTOR VALVE

THIS KIT REPLACES THE 1263450 AXIAL PISTON PUMP - KIT INCLUDES: NEW PUMP DRIVE GEAR, FILTER SCREEN, ADAPTER BLOCK & MOUNTING PLATE & ALL HOSES, VALVES, FITTINGS, GASKETS, AND INSTRUCTIONS NEEDED FOR CONVERSION - KIT DOES NOT INCLUDE HYDRAULIC PUMP
PUMP PART NUMBER'S 70931 NEW (12 GPM), 70932 NEW (15 GPM), OR 70935 NEW (17 GPM) ARE AVAILABLE AND MUST BE ORDERED SEPARATELY

THIS KIT REPLACES THE 1263450 AXIAL PISTON PUMP - KIT INCLUDES: NEW PUMP DRIVE GEAR, FILTER SCREEN, ALL HOSES, VALVES, FITTINGS, GASKETS, AND INSTRUCTIONS NEEDED FOR CONVERSION - KIT DOES NOT INCLUDE HYDRAULIC PUMP, PUMP MOUNTING FLANGE & ADAPTER BLOCK.
PUMP PART NUMBER'S 70931 NEW (12 GPM), 70932 NEW (15 GPM), OR 70935 NEW (17 GPM) ARE AVAILABLE AND MUST BE ORDERED SEPARATELY

WITH NUT, KEY & O-RINGS

W/NUT, KEY AND O-RINGS
NOT COMPATIBLE WITH PIGGY BACK PUMP

W/NUT, KEY AND O-RINGS
NOT COMPATIBLE WITH PIGGY BACK PUMP

2500 PSI

2300 PSI

FITS: 7031, 70932, 70933 & 70935

FITS: 70931 NEW, 70932 NEW, 70933 NEW & 70935 NEW

HITCH PUMP GASKET

OPTION FOR 386867 O-RING

ORIGINAL KIT
ELIMINATES SUPERCHARGE SYSTEM
FOR OPEN HYDRAULICS ONLY

FOR OPEN HYDRAULICS ONLY
UPDATED KIT,
ELIMINATES SUPERCHARGE SYSTEM & MCV BRAKE LUBE LINE & INCREASES BRAKE LUBE

ADD TO THE TRACTORS THAT HAVE 830414 INSTALLED TO INCREASE BRAKE LUBE. FOR OPEN CENTER HYDRAULICS ONLY
UPDATE TO LATE DESIGN

OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK, BRAKE PISTONS.
FOR UNITS WITH HYDRAULIC BRAKES

OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK, BRAKE PISTONS.
FOR UNITS WITH HYDRAULIC BRAKES

OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK.
DOES NOT INCLUDE BRAKE PISTONS
FOR UNITS WITH HYDRAULIC BRAKES

OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK.
DOES NOT INCLUDE BRAKE PISTONS
FOR UNITS WITH HYDRAULIC BRAKES

COMPLETE GASKET, O-RING & SEAL PACKAGE
FOR UNITS WITH HYDRAULIC BRAKES

COMPLETE OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS, CLUTCH PACK AND BRAKE PISTONS.
FOR UNITS WITH SPRING ACTIVATED BRAKES

COMPLETE OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS, CLUTCH PACK AND BRAKE PISTONS.
FOR UNITS WITH SPRING ACTIVATED BRAKES

OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK.
DOES NOT INCLUDE BRAKE PISTONS
FOR UNITS WITH SPRING ACTIVATED BRAKES

COMPLETE GASKET, O-RING & SEAL PACKAGE
FOR UNITS WITH HYDRAULIC BRAKES

OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK.
DOES NOT INCLUDE BRAKE PISTONS
FOR UNITS WITH SPRING ACTIVATED BRAKES

COMPLETE GASKET, O-RING & SEAL PACKAGE
FOR UNITS WITH SPRING ACTIVATED BRAKES

COMPLETE GASKET, O-RING & SEAL PACKAGE WITH HEAVY DUTY CLUTCH DRUM SEAL RINGS
FOR UNITS WITH SPRING ACTIVATED BRAKES

GASKET & O-RING PACKAGE
FOR CLUTCH DRUM SERVICE ONLY

INCLUDES: CAST CLUTCH DRUM SEAL RINGS

CONTAINS: 12 STEEL PLATES & 5 FIBER PLATES

CONTAINS: 12 STEEL PLATES & 5 FIBER PLATES

CONTAINS: 9 STEEL PLATES & 7 FIBER PLATES

CONTAINS: 9 STEEL PLATES & 7 FIBER PLATES

CONTAINS: 10 INTERNAL TOOTH & 10 EXTERNAL TOOTH FRICTION PLATES

FOR USE WITH SPRING ACTIVATED BRAKES

FOR USE WITH HYDRAULIC BRAKES

INCLUDES: CONTROL VALVE GUIDE, CONTROL VALVE GUIDE STEM & CONTROL VALVE DOWEL FOR SINGLE & DUAL SPEED PTO UNITS WITH SPRING APPLIED BRAKES

CONTROL VALVE SEAL
FITS UNITS WITH SPRING ACTIVATED BRAKES

FITS UNITS WITH HYDRAULIC APPLIED BRAKES

CONTROL VALVE SEAL PLUG ORING
FITS UNITS WITH HYDRAULIC AND SPRING APPLIED BRAKES

PTO CLUTCH DRUM RETAINING SNAP-RING

FOR 1000 RPM SHAFT

FOR 540 RPM SHAFT

BEARING RETAINING RING

PTO IDLER GEAR - DUAL SPEED ONLY

540 SHAFT DRIVEN GEAR - DUAL SPEED ONLY

SPACER FOR 540 SHAFT DRIVEN GEAR - DUAL SPEED ONLY

540 & 1000 RPM REAR PTO OUTPUT SHAFTS

PTO IDLER SHAFT - DUAL SPEED ONLY

IDLER GEAR THRUST WASHER - DUAL SPEED ONLY - 2 REQUIRED

IDLER GEAR BEARING - DUAL SPEED PTO ONLY - 2 REQUIRED

540 OUTPUT SHAFT FRONT BEARING - DUAL SPEED ONLY

PTO UNIT TO TRACTOR

INCLUDES: SEAL, EXTERNAL REPAIR FOR 540 RPM SHAFT SEAL LEAKAGE

FOR UNITS WITH SPRING APPLIED BRAKES
3 REQUIRED

FOR UNITS WITH SPRING APPLIED BRAKES, (NEW AVAILABLE)
3 REQUIRED

(NEW AVAILABLE)
Required: 3

FOR CONTROL VALVE

FITS: 540 RPM AND 1 3/8" 1000 RPM SHAFTS
2 REQUIRED

TEFLON CLUTCH DRUM SEAL RING

CAST CLUTCH DRUM SEAL RING
HD OPTION FOR 381485

CLUTCH DRUM TO SHAFT O-RING

CLUTCH PISTON INNER O-RING

PTO CLUTCH FRICTION DISC
Required: 5 FOR OEM CLUTCH PACK OR 7 FOR HEAVY DUTY CLUTCH PACK

HD OPTION FOR 381490
Required: 5 FOR OEM CLUTCH PACK OR 7 FOR HEAVY DUTY CLUTCH PACK

51 INTERNAL TEETH WITH FRICTION MATERIAL ON 1 SIDE
CAN ONLY BE USED WITH 1863971

6 EXTERNAL TABS WITH FRICTION MATERIAL ON 1 SIDE
CAN ONLY BE USED WITH 1863972

INCLUDES: HUB, 8 FIN IMPELLER & MOUNTING GASKET

INCLUDES: DRIVE GEAR, THRUST PLATE & 12 NEW 1" LIFTERS

INCLUDES: DRIVE GEAR, THRUST PLATE & 12 NEW 1 1/8" LIFTERS

INCLUDES: DRIVE GEAR AND THRUST PLATE; ORDER LIFTERS

W/O GEAR, ORDER LIFTERS SEPARATELY

1 1/8"
Required: 12

1"
Required: 12

FOR INSTALLATION OF 1809964 REAR MAIN SEAL

CONTAINS 7 STEEL PLATES, 6 FRICTION DISCS, O-RINGS AND GASKET
Required: 1 PER SIDE

OUTER

INNER
Required: 1 PER SIDE

24 SPLINES

24 SPLINES WITH NUT AND BOLT

24 SPLINES

24 SPLINES WITH NUT AND BOLT

GLYCERIN FILLED
USED TO CHECK TA LUBE PRESSURE

GLYCERIN FILLED
USED TO CHECK TA CLUTCH PRESSURE

USED TO CHECK FOR SUMP CHECK VALVE LEAKAGE

FOR INSTALLATION OF 1809964 REAR MAIN SEAL

REQ. FOR INSTALLATION OF 528707 RING GEAR/PINION AND 120265 RING GEAR/PINION UPDATE KIT

REQ. WHEN ORDERING PART NUMBER 9203

R12 & R134A COMPATIBLE

AFTERMARKET

WITH FLARE ADAPTERS

HD 3 SPEED 12 VOLT DUAL MOTOR ASSEMBLY, CFM-696 FOR REPLACEMENT MOTORS ORDER BM3904, USES ORIGINAL WIRE CONNECTION

CAN ORDER 6 PACK - 320-143481-6

INCLUDES: ROTOLOCK WASHERS & O-RINGS;
SINGLE APPLICATION FOR 786, 886, 986, 1086, 1486, 1586;
FOR QUICK COUPLER SQUARE CUT GASKETS ORDER - 440-996

CAN USE 990-358 - ALTERNATE VERSION;
ORDER 451-6265K TO REPLACE ORIGINAL SERVICE VALVES, UNIVERSAL KIT - USE FOR FLARE & O-RING APPLICATIONS.

CAN USE 990-357 - OE SANDEN;
ORDER 451-6265K TO REPLACE ORIGINAL SERVICE VALVES, UNIVERSAL KIT - USE FOR FLARE & O-RING APPLICATIONS.

INCLUDES: 902-210 EXPANSION VALVE;
HIGH EFFICIENCY EVAPORATOR WITH FLARE ADAPTERS

4" x 6 3/4" MALE FLARE, FRONT MOUNT
CAN USE HEAVY DUTY DRY-TECH SERIES 804-505

CAN USE HEAVY DUTY DRY-TECH SERIES DRIER 804-533

5/8" HOSE MANUAL ON/OFF HEATER HOSE VALVE WITH 3/8" MALE PIPE THREAD;
FOR 5/8" HOSE