KIT INCLUDES: PPA 6 PAD DISC RELEASE AND PILOT BEARINGS FLYWHEEL STEP: 1.406"
FLYWHEEL STEP: 1.406"
(NEW AVAILABLE)
RECOMMENDED FOR FLYWHEELS THAT HAVE BEEN MACHINED BELOW SPECIFICATIONS FOR CLEARANCE OF CRANKSHAFT MOUNTING BOLTS.
LESS ABRASIVE RECOMMENDED FOR LOADER APPLICATION.
INCLUDES: RELEASE BEARING & RELEASE BEARING CARRIER
INCLUDES: AETNA RELEASE BEARING & RELEASE BEARING CARRIER
GREASABLE
GREASEABLE
GREASABLE AETNA BEARING
GREASABLE FITS: TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED INCLUDES: RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, IPTO FRONT & REAR SEALS
FITS: TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED INCLUDES: GREASEABLE RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, FEDERAL MOGUL FRONT & REAR IPTO SEALS
FITS: TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED INCLUDES: GREASEABLE AETNA RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, FEDERAL MOGUL FRONT & REAR IPTO SEALS
GREASABLE FITS FACTORY NON-TA TRACTORS INCLUDES: RELEASE BEARING, PILOT BEARING, BUSHING, TA O-RING & IPTO FRONT & REAR SEALS
FITS: 405300-9, 104496-9 & 405301
HOLES ARE IN GROUPS OF 2
Required: 3
INCLUDES RING GEAR
FOR 12" FLYWHEELS WITH 132 TEETH; DIESEL ONLY
INCLUDES: RING GEAR ALSO, FITS: 966 & 986 WHEN CONVERTING TO 14" CLUTCH
FITS: 14" FLYWHEEL ONLY
KIT INCLUDES: NEW CLUTCH SHAFT, RELEASE FORK, RELEASE BEARING & RELEASE BEARING CARRIER
FITS TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATION KIT INSTALLED. KIT INCLUDES IPTO: SHAFT, BEARING, BEARING CAGE, BEARING CAGE O-RING & FRONT & REAR SEALS
FITS TRACTORS WITH TA OR THAT HAVE HAD TA ELIMINATION KIT INSTALLED KIT INCLUDES: IPTO SHAFT, BEARING, BEARING CAGE, BEARING CAGE O-RING & FEDERAL MOGUL FRONT & REAR IPTO SEALS
FITS TRACTORS WITH OR WITHOUT TA
FITS TRACTORS WITH TA OR THAT HAVE HAD TA ELIMINATOR INSTALLED
BALL TYPE
ROLLER TYPE
FITS TRACTORS WITHOUT TA
FITS TRACTORS WITH TA
FITS TRACTORS WITH TA INCLUDES: 1 - 535208, 1 - 535209 & 1 - 22414
FITS TRACTOR WITH TA
KIT CONTENTS: 535208R92 DOUBLE SHELL SEAL, 535209R92 DOUBLE SHELL SEAL & 22414 ORING (BEARING CAGE)
FITS TRACTORS WITH TA INCLUDES: 1 - 535208FM FEDERAL MOGUL SEAL, 1 - 535209FM FEDERAL MOGUL SEAL & 1 - 22414 BEARING CAGE O-RING
FITS: FACTORY NON-TA TRACTORS INCLUDES: 1 - 535208, 1 - 535209 & 1 - 22419 DOES NOT INCLUDE BUSHING
FITS FACTORY NON-TA TRACTORS; INCLUDES: 1-535208, 1-535209, 1-22419 & 1-384185
FITS TA HOUSING OR FACTORY NON-TA BEARING CAGE
INNER FITS TRACTORS WITH OR WITHOUT TA
INNER FITS TRACTORS WITH OR WITHOUT TA DOUBLE SHELL SEAL
FEDERAL MOGUL REAR/INNER IPTO SEAL FITS TRACTORS WITH OR WITHOUT TA
FRONT/OUTER FITS TRACTORS WITH OR WITHOUT TA
FRONT/OUTER FITS TRACTORS WITH OR WITHOUT TA DOUBLE SHELL SEAL
FEDERAL MOGUL FRONT/OUTER IPTO SEAL FITS TRACTORS WITH OR WITHOUT TA
3 YEAR WARRANTY ON TA ONLY INCLUDES: TA, GASKETS, QUILL, MCV PUMP & LOWER GEAR
KIT INCLUDES: TA GASKET KIT QUILL MCV PUMP LOWER GEAR 5 YEAR WARRANTY
3 YEAR WARRANTY, OEM 3 DIRECT DRIVE DISCS & 2 ANTI-FREE WHEEL DISCS INCLUDES: LOWER GEAR
HEAVY DUTY 5 YEAR WARRANTY 4 DIRECT DRIVE DISC & 2 ANTI-FREE WHEEL DISC INCLUDES: LOWER GEAR
6 YEAR WARRANTY HEAVY DUTY 4 DIRECT DRIVE DISC AND 3 ANTI-FREE WHEEL DISC INCLUDES: LOWER GEAR
6 YEAR WARRANTY HEAVY DUTY REQUIRES THE USE OF A PULLER IPTO SHAFT 4 DIRECT DRIVE DISC AND 3 ANTI-FREE WHEEL DISC INCLUDES: LOWER GEAR
MCV OR STEERING HYDRAULIC PUMP
INCLUDES: INNER BEARINGS PRE-INSTALLED
FOR TA INSTALLATION INCLUDES: 393877 MCV OVERHAUL KIT
FOR TA INSTALLATION INCLUDES: 393877 MCV OVERHAUL KIT FEDERAL MOGUL IPTO SEALS
NOTE: FLAT SIDE GOES TO TA
KIT INCLUDES: 3-PAPER DISCS 1-METALLIC DISC
INCLUDES: 30 - .015" TA SHIMS
INCLUDES: 30 - .032" TA SHIMS
INCLUDES: 15 - .015" TA SHIMS & 15 - .032" TA SHIMS
USED TO ALIGN CONSTANT MESH GEARS WHEN SHIMMING TA INCLUDES: 12 - .024 & 12 - .044 THICK SPACERS
REPLACEMENT SHAFT FOR TA ELIMINATED AND OEM NON-TA TRACTORS INCLUDES: INNER BEARING PRE-INSTALLED
529434 SPEED TRANSMISSION MAIN SHAFT ALSO REQUIRED IF EXISTING MAIN SHAFT IS NOT DRILLED THROUGHT CENTER
MUST POSITIVELY IDENTIFY TOOTH DEGREE.
FITS APPLICATIONS WITH OR WITHOUT TA
LEFT HAND THREAD, REQUIRES THE ADDITION OF ONE 71147C1 SPLINED FRONT SPACER, IF ONE IS NOT ALREADY BEING USED
LEFT HAND THREAD HEAVY DUTY THICK WALL REQUIRES THE ADDITION OF ONE 71147C1 SPLINED FRONT SPACER, IF ONE IS NOT ALREADY BEING USED
SPLINED FRONT SPACER
COUNTERSHAFT CONSTANT MESH GEAR STOP
LEFT HAND THREADS, USED WITH 148951 AND 380082 LH COUNTERSHAFTS
RIGHT HAND THREADS
USED WITH 380092 RIGHT HAND NUT
REQ. FOR INSTALLATION OF 528707 RING GEAR/PINION AND 120265 RING GEAR/PINION UPDATE KIT
REQ. WHEN ORDERING PART NUMBER 9203
SINGLE HOLE, INCLUDES: GASKET
FOR SPEED TRANSMISSION
INCLUDES: O-RING
MADE IN USA INCLUDES: CONTROL ARM, ROLLER & SPRING
2 REQ. FOR RANGE TRANSMISSION, 3 REQ. FOR SPEED TRANSMISSION
INCLUDES: MISC. PLUGS AND GASKET FILLER TUBE NOT INCLUDED
MADE IN USA
FOR RANGE TRANSMISSION
FOR RANGE TRANSMISSION MADE IN USA
FITS TRACTORS WITH MECHANICAL TRANSMISSION BRAKE
FOR TRACTORS WITH MECHANICAL TRANSMISSION BRAKE
RING GEAR & PINION / DIFFERENTIAL
TOP COVER PRESSURE PORT
OPTION FOR 386867 O-RING
OPTION FOR 318884 O-RING
SPLIT O-RING 1 1/4" ID
SPLIT O-RING 1 1/2" ID
TRANSMISSION BRAKE SHAFT O-RING
MCV OVERHAUL KIT; INCLUDES: MCV GASKETS, SPRING KIT & O-RING KIT FOR TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED DOES NOT FIT FACTORY NON-TA TRACTORS.
.015 THICK
.023 THICK
FOR TA SELECTOR VALVE
FITS: MCV PUMP
FITS: 70931 NEW, 70932 NEW, 70933 NEW & 70935 NEW
WITH NUT, KEY & O-RINGS
W/NUT, KEY AND O-RINGS NOT COMPATIBLE WITH PIGGY BACK PUMP
2500 PSI
2300 PSI
FITS: 7031, 70932, 70933 & 70935
HITCH PUMP GASKET
ORIGINAL KIT ELIMINATES SUPERCHARGE SYSTEM FOR OPEN HYDRAULICS ONLY
FOR OPEN HYDRAULICS ONLY UPDATED KIT, ELIMINATES SUPERCHARGE SYSTEM & MCV BRAKE LUBE LINE & INCREASES BRAKE LUBE
ADD TO THE TRACTORS THAT HAVE 830414 INSTALLED TO INCREASE BRAKE LUBE. FOR OPEN CENTER HYDRAULICS ONLY UPDATE TO LATE DESIGN
OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK, BRAKE PISTONS. FOR UNITS WITH HYDRAULIC BRAKES
OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK. DOES NOT INCLUDE BRAKE PISTONS FOR UNITS WITH HYDRAULIC BRAKES
COMPLETE GASKET, O-RING & SEAL PACKAGE FOR UNITS WITH HYDRAULIC BRAKES
COMPLETE OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS, CLUTCH PACK AND BRAKE PISTONS. FOR UNITS WITH SPRING ACTIVATED BRAKES
OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK. DOES NOT INCLUDE BRAKE PISTONS FOR UNITS WITH SPRING ACTIVATED BRAKES
COMPLETE GASKET, O-RING & SEAL PACKAGE FOR UNITS WITH SPRING ACTIVATED BRAKES
COMPLETE GASKET, O-RING & SEAL PACKAGE WITH HEAVY DUTY CLUTCH DRUM SEAL RINGS FOR UNITS WITH SPRING ACTIVATED BRAKES
GASKET & O-RING PACKAGE FOR CLUTCH DRUM SERVICE ONLY
INCLUDES: CAST CLUTCH DRUM SEAL RINGS
CONTAINS: 12 STEEL PLATES & 5 FIBER PLATES
CONTAINS: 9 STEEL PLATES & 7 FIBER PLATES
CONTAINS: 10 INTERNAL TOOTH & 10 EXTERNAL TOOTH FRICTION PLATES
FOR USE WITH SPRING ACTIVATED BRAKES
FOR USE WITH HYDRAULIC BRAKES
INCLUDES: CONTROL VALVE GUIDE, CONTROL VALVE GUIDE STEM & CONTROL VALVE DOWEL FOR SINGLE & DUAL SPEED PTO UNITS WITH SPRING APPLIED BRAKES
CONTROL VALVE SEAL FITS UNITS WITH SPRING ACTIVATED BRAKES
FITS UNITS WITH HYDRAULIC APPLIED BRAKES
CONTROL VALVE SEAL PLUG ORING FITS UNITS WITH HYDRAULIC AND SPRING APPLIED BRAKES
PTO CLUTCH DRUM RETAINING SNAP-RING
FOR 1000 RPM SHAFT
FOR 540 RPM SHAFT
BEARING RETAINING RING
PTO IDLER GEAR - DUAL SPEED ONLY
540 SHAFT DRIVEN GEAR - DUAL SPEED ONLY
SPACER FOR 540 SHAFT DRIVEN GEAR - DUAL SPEED ONLY
540 & 1000 RPM REAR PTO OUTPUT SHAFTS
PTO IDLER SHAFT - DUAL SPEED ONLY
IDLER GEAR THRUST WASHER - DUAL SPEED ONLY - 2 REQUIRED
IDLER GEAR BEARING - DUAL SPEED PTO ONLY - 2 REQUIRED
540 OUTPUT SHAFT FRONT BEARING - DUAL SPEED ONLY
PTO UNIT TO TRACTOR
INCLUDES: SEAL, EXTERNAL REPAIR FOR 540 RPM SHAFT SEAL LEAKAGE
FOR UNITS WITH SPRING APPLIED BRAKES 3 REQUIRED
FOR UNITS WITH SPRING APPLIED BRAKES, (NEW AVAILABLE) 3 REQUIRED
(NEW AVAILABLE) Required: 3
FOR CONTROL VALVE
FITS: 540 RPM AND 1 3/8" 1000 RPM SHAFTS 2 REQUIRED
TEFLON CLUTCH DRUM SEAL RING
CAST CLUTCH DRUM SEAL RING HD OPTION FOR 381485
CLUTCH DRUM TO SHAFT O-RING
CLUTCH PISTON INNER O-RING
PTO CLUTCH FRICTION DISC Required: 5 FOR OEM CLUTCH PACK OR 7 FOR HEAVY DUTY CLUTCH PACK
HD OPTION FOR 381490 Required: 5 FOR OEM CLUTCH PACK OR 7 FOR HEAVY DUTY CLUTCH PACK
51 INTERNAL TEETH WITH FRICTION MATERIAL ON 1 SIDE CAN ONLY BE USED WITH 1863971
6 EXTERNAL TABS WITH FRICTION MATERIAL ON 1 SIDE CAN ONLY BE USED WITH 1863972
INCLUDES: HUB AND MOUNTING GASKET GERMAN DIESEL (NEW AVAILABLE)
INCLUDES: HUB AND MOUNTING GASKET GERMAN DIESEL
INCLUDES: HUB, 8 FIN IMPELLER & MOUNTING GASKET
INCLUDES: HUB, 4 FIN IMPELLER AND MOUNTING GASKET CAN USE 672644 WATER PUMP W / 8 FIN IMPELLER
FOR INSTALLATION OF 1809964 REAR MAIN SEAL
CONTAINS 7 STEEL PLATES, 6 FRICTION DISCS, O-RINGS AND GASKET Required: 1 PER SIDE
OUTER
INNER Required: 1 PER SIDE
24 SPLINES
24 SPLINES WITH NUT AND BOLT
GLYCERIN FILLED USED TO CHECK TA LUBE PRESSURE
GLYCERIN FILLED USED TO CHECK TA CLUTCH PRESSURE
USED TO CHECK FOR SUMP CHECK VALVE LEAKAGE
R12 & R134A COMPATIBLE
AFTERMARKET
WITH FLARE ADAPTERS
HD 3 SPEED 12 VOLT DUAL MOTOR ASSEMBLY, CFM-696 FOR REPLACEMENT MOTORS ORDER BM3904, USES ORIGINAL WIRE CONNECTION
CAN ORDER 6 PACK - 320-143481-6
INCLUDES: ROTOLOCK WASHERS & O-RINGS; SINGLE APPLICATION FOR 786, 886, 986, 1086, 1486, 1586; FOR QUICK COUPLER SQUARE CUT GASKETS ORDER - 440-996
CAN USE 990-358 - ALTERNATE VERSION; ORDER 451-6265K TO REPLACE ORIGINAL SERVICE VALVES, UNIVERSAL KIT - USE FOR FLARE & O-RING APPLICATIONS.
CAN USE 990-357 - OE SANDEN; ORDER 451-6265K TO REPLACE ORIGINAL SERVICE VALVES, UNIVERSAL KIT - USE FOR FLARE & O-RING APPLICATIONS.
INCLUDES: 902-210 EXPANSION VALVE; HIGH EFFICIENCY EVAPORATOR WITH FLARE ADAPTERS
4" x 6 3/4" MALE FLARE, FRONT MOUNT CAN USE HEAVY DUTY DRY-TECH SERIES 804-505
CAN USE HEAVY DUTY DRY-TECH SERIES DRIER 804-533
5/8" HOSE MANUAL ON/OFF HEATER HOSE VALVE WITH 3/8" MALE PIPE THREAD; FOR 5/8" HOSE
4" X 7 3/4" MALE AND FEMALE O-RING, FRONT MOUNT. CAN USE HEAVY DUTY DRY-TECH SERIES 804-545.