FOR HYDRO TRACTORS
INCLUDES RING GEAR
FOR 12" FLYWHEELS WITH 132 TEETH; DIESEL ONLY
THIS KIT REPLACES THE 1263450 AXIAL PISTON PUMP - KIT INCLUDES: NEW PUMP DRIVE GEAR, FILTER SCREEN, ADAPTER BLOCK & MOUNTING PLATE & ALL HOSES, VALVES, FITTINGS, GASKETS, AND INSTRUCTIONS NEEDED FOR CONVERSION - KIT DOES NOT INCLUDE HYDRAULIC PUMP PUMP PART NUMBER'S 70931 NEW (12 GPM), 70932 NEW (15 GPM), OR 70935 NEW (17 GPM) ARE AVAILABLE AND MUST BE ORDERED SEPARATELY
THIS KIT REPLACES THE 1263450 AXIAL PISTON PUMP - KIT INCLUDES: NEW PUMP DRIVE GEAR, FILTER SCREEN, ALL HOSES, VALVES, FITTINGS, GASKETS, AND INSTRUCTIONS NEEDED FOR CONVERSION - KIT DOES NOT INCLUDE HYDRAULIC PUMP, PUMP MOUNTING FLANGE & ADAPTER BLOCK. PUMP PART NUMBER'S 70931 NEW (12 GPM), 70932 NEW (15 GPM), OR 70935 NEW (17 GPM) ARE AVAILABLE AND MUST BE ORDERED SEPARATELY
WITH NUT, KEY & O-RINGS
W/NUT, KEY AND O-RINGS NOT COMPATIBLE WITH PIGGY BACK PUMP
FITS: 7031, 70932, 70933 & 70935
FITS: 70931 NEW, 70932 NEW, 70933 NEW & 70935 NEW
HITCH PUMP GASKET
OPTION FOR 386867 O-RING
OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK, BRAKE PISTONS. FOR UNITS WITH HYDRAULIC BRAKES
OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK. DOES NOT INCLUDE BRAKE PISTONS FOR UNITS WITH HYDRAULIC BRAKES
COMPLETE GASKET, O-RING & SEAL PACKAGE FOR UNITS WITH HYDRAULIC BRAKES
GASKET & O-RING PACKAGE FOR CLUTCH DRUM SERVICE ONLY
INCLUDES: CAST CLUTCH DRUM SEAL RINGS
CONTAINS: 12 STEEL PLATES & 5 FIBER PLATES
CONTAINS: 9 STEEL PLATES & 7 FIBER PLATES
CONTAINS: 10 INTERNAL TOOTH & 10 EXTERNAL TOOTH FRICTION PLATES
FOR USE WITH HYDRAULIC BRAKES
FITS UNITS WITH HYDRAULIC APPLIED BRAKES
PTO CLUTCH DRUM RETAINING SNAP-RING
FOR 1000 RPM SHAFT
FOR 540 RPM SHAFT
BEARING RETAINING RING
PTO IDLER GEAR - DUAL SPEED ONLY
540 SHAFT DRIVEN GEAR - DUAL SPEED ONLY
SPACER FOR 540 SHAFT DRIVEN GEAR - DUAL SPEED ONLY
540 & 1000 RPM REAR PTO OUTPUT SHAFTS
PTO IDLER SHAFT - DUAL SPEED ONLY
IDLER GEAR THRUST WASHER - DUAL SPEED ONLY - 2 REQUIRED
IDLER GEAR BEARING - DUAL SPEED PTO ONLY - 2 REQUIRED
540 OUTPUT SHAFT FRONT BEARING - DUAL SPEED ONLY
PTO UNIT TO TRACTOR
INCLUDES: SEAL, EXTERNAL REPAIR FOR 540 RPM SHAFT SEAL LEAKAGE
(NEW AVAILABLE) Required: 3
FITS: 540 RPM AND 1 3/8" 1000 RPM SHAFTS 2 REQUIRED
TEFLON CLUTCH DRUM SEAL RING
CAST CLUTCH DRUM SEAL RING HD OPTION FOR 381485
CLUTCH DRUM TO SHAFT O-RING
CLUTCH PISTON INNER O-RING
PTO CLUTCH FRICTION DISC Required: 5 FOR OEM CLUTCH PACK OR 7 FOR HEAVY DUTY CLUTCH PACK
HD OPTION FOR 381490 Required: 5 FOR OEM CLUTCH PACK OR 7 FOR HEAVY DUTY CLUTCH PACK
51 INTERNAL TEETH WITH FRICTION MATERIAL ON 1 SIDE CAN ONLY BE USED WITH 1863971
6 EXTERNAL TABS WITH FRICTION MATERIAL ON 1 SIDE CAN ONLY BE USED WITH 1863972
INCLUDES: HUB, 8 FIN IMPELLER & MOUNTING GASKET
INCLUDES: DRIVE GEAR, THRUST PLATE & 12 NEW 1" LIFTERS
INCLUDES: DRIVE GEAR, THRUST PLATE & 12 NEW 1 1/8" LIFTERS
INCLUDES: DRIVE GEAR AND THRUST PLATE; ORDER LIFTERS
W/O GEAR, ORDER LIFTERS SEPARATELY
1 1/8" Required: 12
1" Required: 12
FOR INSTALLATION OF 1809964 REAR MAIN SEAL
CONTAINS 7 STEEL PLATES, 6 FRICTION DISCS, O-RINGS AND GASKET Required: 1 PER SIDE
OUTER
INNER Required: 1 PER SIDE
24 SPLINES
24 SPLINES WITH NUT AND BOLT
HD 3 SPEED 12 VOLT DUAL MOTOR ASSEMBLY, CFM-696 FOR REPLACEMENT MOTORS ORDER BM3904, USES ORIGINAL WIRE CONNECTION
CAN ORDER 6 PACK - 320-143481-6
5/8" HOSE MANUAL ON/OFF HEATER HOSE VALVE WITH 3/8" MALE PIPE THREAD; FOR 5/8" HOSE