GREASEABLE
KIT INCLUDES: PPA HEAVY DUTY 6 PAD DISC RELEASE & PILOT BEARINGS FLYWHEEL STEP 1.938"
INCLUDES: PPA, HEAVY DUTY 6 PAD DISC, AETNA RELEASE BEARING & PILOT BEARING FLYWHEEL STEP 1.938"
INCLUDES: PPA (HYDRAULIC CLUTCH ASSIST SUGGESTED), HEAVY DUTY 6 PAD DISC, RELEASE & PILOT BEARINGS FLYWHEEL STEP: 1.938"
INCLUDES: PPA (HYDRAULIC CLUTCH ASSIST SUGGESTED), HEAVY DUTY 6 PAD DISC, AETNA RELEASE BEARING, PILOT BEARING FLYWHEEL STEP 1.938"
INCLUDES: PPA (HYDRAULIC CLUTCH ASSIST SUGGESTED), HEAVY DUTY 8 PAD DISC, RELEASE & PILOT BEARINGS FLYWHEEL STEP: 1.938"
INCLUDES: PPA (HYDRAULIC CLUTCH ASSIST SUGGESTED), HEAVY DUTY 8 PAD DISC, AETNA RELEASE BEARING, PILOT BEARING FLYWHEEL STEP: 1.938"
INCLUDES: PPA (HYDRAULIC CLUTCH ASSIST SUGGESTED), 8 REGULAR PAD DISC, RELEASE & PILOT BEARINGS FLYWHEEL STEP 1.938"
FOR TRACTORS WITHOUT HYDRAULIC CLUTCH ASSIST (WITH NEW CAST OR NEW AVAILABLE) FLYWHEEL STEP 1.938"
FOR TRACTORS WITHOUT HYDRAULIC CLUTCH ASSIST FLYWHEEL STEP 1.938"
FOR TRACTORS WITH HYDRAULIC CLUTCH ASSIST HEAVY DUTY FLYWHEEL STEP 1.938" (67597 NC WITH NEW CAST OR 67597 NEW AVAILABLE)
HEAVY DUTY FOR TRACTORS WITH HYDRAULIC CLUTCH ASSIST. FLYWHEEL STEP: 1.938"
FOR TRACTORS WITH HYDRAULIC CLUTCH ASSIST. FLYWHEEL STEP: 1.938"
(NEW AVAILABLE)
INCLUDES: RELEASE BEARING & RELEASE BEARING CARRIER
INCLUDES: AETNA RELEASE BEARING & RELEASE BEARING CARRIER
GREASABLE
GREASABLE AETNA BEARING
GREASABLE FITS: TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED INCLUDES: RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, IPTO FRONT & REAR SEALS
FITS: TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED INCLUDES: GREASEABLE AETNA RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, FEDERAL MOGUL FRONT & REAR IPTO SEALS
FITS: TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED INCLUDES: GREASEABLE RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, FEDERAL MOGUL FRONT & REAR IPTO SEALS
GREASABLE FITS FACTORY NON-TA TRACTORS INCLUDES: RELEASE BEARING, PILOT BEARING, BUSHING, TA O-RING & IPTO FRONT & REAR SEALS
FITS: 14" FLYWHEEL ONLY
KIT INCLUDES: 380180 CLUTCH SHAFT 380110 RELEASE FORK 380109K RELEASE BEARING CARRIER
FITS TRACTORS WITH TA OR THAT HAVE HAD TA ELIMINATOR INSTALLED
BALL TYPE
ROLLER TYPE
FITS TRACTORS WITHOUT TA
FITS: FACTORY NON-TA TRACTORS INCLUDES: 1 - 535208, 1 - 535209 & 1 - 22419 DOES NOT INCLUDE BUSHING
FITS FACTORY NON-TA TRACTORS; INCLUDES: 1-535208, 1-535209, 1-22419 & 1-384185
FITS TA HOUSING OR FACTORY NON-TA BEARING CAGE
INNER FITS TRACTORS WITH OR WITHOUT TA
INNER FITS TRACTORS WITH OR WITHOUT TA DOUBLE SHELL SEAL
FEDERAL MOGUL REAR/INNER IPTO SEAL FITS TRACTORS WITH OR WITHOUT TA
FRONT/OUTER FITS TRACTORS WITH OR WITHOUT TA
FRONT/OUTER FITS TRACTORS WITH OR WITHOUT TA DOUBLE SHELL SEAL
FEDERAL MOGUL FRONT/OUTER IPTO SEAL FITS TRACTORS WITH OR WITHOUT TA
REPLACEMENT SHAFT FOR TA ELIMINATED AND OEM NON-TA TRACTORS INCLUDES: INNER BEARING PRE-INSTALLED
LEFT HAND THREAD, REQUIRES THE ADDITION OF ONE 71147C1 SPLINED FRONT SPACER, IF ONE IS NOT ALREADY BEING USED
LEFT HAND THREAD HEAVY DUTY THICK WALL REQUIRES THE ADDITION OF ONE 71147C1 SPLINED FRONT SPACER, IF ONE IS NOT ALREADY BEING USED
SPLINED FRONT SPACER
LEFT HAND THREADS, USED WITH 148951 AND 380082 LH COUNTERSHAFTS
RIGHT HAND THREADS
USED WITH 380092 RIGHT HAND NUT
DOUBLE HOLE; INCLUDES: GASKET
FOR SPEED TRANSMISSION
MADE IN USA INCLUDES: CONTROL ARM, ROLLER & SPRING
2 REQ. FOR RANGE TRANSMISSION, 3 REQ. FOR SPEED TRANSMISSION
INCLUDES: FILL TUBE GASKET
Required: 1
FOR RANGE TRANSMISSION
INCLUDES: O-RING AND ROLLER MADE IN THE USA
FOR RANGE TRANSMISSION, INCLUDES: O-RING & ROLL PIN
NEW SPRING LOADED
PARK LOCK LINK REPLACEMENT
FITS TRACTORS WITH MECHANICAL TRANSMISSION BRAKE
FOR TRACTORS WITH MECHANICAL TRANSMISSION BRAKE
INCLUDES: NUT, KEY AND O-RING; CAN USE 120115 NEW 12 GPM PUMP
FITS: MCV PUMP
FITS: 70931 NEW, 70932 NEW, 70933 NEW & 70935 NEW
MCV OVERHAUL KIT; INCLUDES: MCV GASKETS, SPRING KIT & O-RING KIT FOR TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED DOES NOT FIT FACTORY NON-TA TRACTORS.
.015 THICK
.023 THICK
FOR TA SELECTOR VALVE
2000 PSI
CONTAINS: 12 STEEL PLATES & 5 FIBER PLATES
CONTAINS: 9 STEEL PLATES & 7 FIBER PLATES
CONTAINS: 10 INTERNAL TOOTH & 10 EXTERNAL TOOTH FRICTION PLATES
CONTROL VALVE SEAL
CONTROL VALVE SEAL PLUG ORING FITS UNITS WITH HYDRAULIC AND SPRING APPLIED BRAKES
PTO CLUTCH DRUM RETAINING SNAP-RING
FOR UNITS WITH SPRING APPLIED BRAKES 3 REQUIRED
FOR UNITS WITH SPRING APPLIED BRAKES, (NEW AVAILABLE) 3 REQUIRED
TEFLON CLUTCH DRUM SEAL RING
CAST CLUTCH DRUM SEAL RING HD OPTION FOR 381485
CLUTCH DRUM TO SHAFT O-RING
CLUTCH PISTON INNER O-RING
PTO CLUTCH FRICTION DISC Required: 5 FOR OEM CLUTCH PACK OR 7 FOR HEAVY DUTY CLUTCH PACK
HD OPTION FOR 381490 Required: 5 FOR OEM CLUTCH PACK OR 7 FOR HEAVY DUTY CLUTCH PACK
51 INTERNAL TEETH WITH FRICTION MATERIAL ON 1 SIDE CAN ONLY BE USED WITH 1863971
6 EXTERNAL TABS WITH FRICTION MATERIAL ON 1 SIDE CAN ONLY BE USED WITH 1863972
FOR INSTALLATION OF 1809964 REAR MAIN SEAL