INTERNATIONAL 6788 International Models: 2200 thru 9000

GREASEABLE

KIT INCLUDES: PPA, 6 PAD DISC, RELEASE, PILOT BEARINGS

INCLUDES: PPA, 6 PAD DISC, AETNA RELEASE BEARING & PILOT BEARING

FLYWHEEL STEP 2.048"; (NEW AVAILABLE)

FLYWHEEL STEP 2.048"

(NEW AVAILABLE)

INCLUDES: RELEASE BEARING & RELEASE BEARING CARRIER

INCLUDES: AETNA RELEASE BEARING & RELEASE BEARING CARRIER

GREASABLE

GREASEABLE

GREASABLE
AETNA BEARING

INCLUDES: RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, IPTO FRONT & REAR SEALS

FITS: 14" FLYWHEEL ONLY

RING GEAR IS INCLUDED

GREASEABLE

KIT INCLUDES: NEW CLUTCH SHAFT, RELEASE FORK, RELEASE BEARING & RELEASE BEARING CARRIER

INCLUDES: RELEASE BEARING & RELEASE BEARING CARRIER

INCLUDES: AETNA RELEASE BEARING & RELEASE BEARING CARRIER

GREASABLE

GREASEABLE

GREASABLE
AETNA BEARING

FITS TRACTORS WITH TA OR THAT HAVE HAD TA ELIMINATION KIT INSTALLED. KIT INCLUDES: IPTO, IPTO BEARING, IPTO BEARING CAGE, BEARING CAGE O-RING, IPTO SEAL, IPTO FRONT & REAR SEALS

FITS TRACTORS WITH OR WITHOUT TA

MUST USE WITH TA'S THAT HAVE SUPPORT BEARING

FITS TRACTORS WITH TA OR THAT HAVE HAD TA ELIMINATOR INSTALLED

FITS TRACTORS WITH TA OR THAT HAVE HAD TA ELIMINATION KIT INSTALLED.

BALL TYPE

ROLLER TYPE

TRACTORS WITHOUT TA

TRACTORS WITH TA

FOR TRACTORS WITH TA
INCLUDES: 1 - 67790, 1 - 535209 & 1 - 22414

FOR TRACTORS WITH TA;
INCLUDES: 1 - 67790F, 1 - 535209F & 1 - 22414

FITS TRACTORS WITH TA

FITS TA HOUSING OR FACTORY NON-TA BEARING CAGE

FRONT/OUTER
FITS TRACTORS WITH OR WITHOUT TA

FRONT/OUTER
FITS TRACTORS WITH OR WITHOUT TA
DOUBLE SHELL SEAL

FEDERAL MOGUL FRONT/OUTER IPTO SEAL
FITS TRACTORS WITH OR WITHOUT TA

INNER
FITS TRACTORS WITH OR WITHOUT TA

FEDERAL MOGUL REAR / INNER IPTO SEAL
FITS TRACTORS WITH OR WITHOUT TA

3 YEAR WARRANTY, OEM
3 DIRECT DRIVE DISCS & 2 ANTI-FREE WHEEL DISCS
INCLUDES: LOWER GEAR

5 YEAR WARRANTY
HEAVY DUTY
4 DIRECT DRIVE DISCS & 2 ANTI-FREE WHEEL DISCS
INCLUDES: LOWER GEAR

6 YEAR WARRANTY
HEAVY DUTY
4 DIRECT DRIVE DISCS & 3 ANTI-FREE WHEEL DISCS
INCLUDES: LOWER GEAR

5 YEAR WARRANTY
HEAVY DUTY
REQUIRES THE USE OF A PULLER IPTO SHAFT
4 DIRECT DRIVE DISC AND 2 ANTI-FREE WHEEL DISC
INCLUDES: LOWER GEAR

FOR TA INSTALLATION
INCLUDES: 393877 MCV OVERHAUL KIT
FEDERAL MOGUL IPTO SEALS

NOTE: FLAT SIDE GOES TO TA

KIT INCLUDES:
3-PAPER DISCS
1-METALLIC DISC

INCLUDES: 30 - .015" TA SHIMS

INCLUDES: 30 - .032" TA SHIMS

INCLUDES: 15 - .015" TA SHIMS & 15 - .032" TA SHIMS

USED TO ALIGN CONSTANT MESH GEARS WHEN SHIMMING TA
INCLUDES: 12 - .024 & 12 - .044 THICK SPACERS

INCLUDES: INNER BEARING PRE-INSTALLED, REPLACEMENT SHAFT FOR TA ELIMINATED & OEM NON-TA TRACTORS

TRACTORS WITHOUT TA

FOR TA INSTALLATION
INCLUDES: 393877 MCV OVERHAUL KIT
FEDERAL MOGUL IPTO SEALS

INCLUDES: INNER BEARINGS PRE-INSTALLED

INCLUDES: INNER BEARING PRE-INSTALLED, REPLACEMENT SHAFT FOR TA ELIMINATED & OEM NON-TA TRACTORS

LEFT HAND THREAD, REQUIRES THE ADDITION OF ONE 71147C1 SPLINED FRONT SPACER, IF ONE IS NOT ALREADY BEING USED

SPLINED FRONT SPACER

COUNTERSHAFT CONSTANT MESH GEAR STOP

LEFT HAND THREADS, USED WITH 148951 AND 380082 LH COUNTERSHAFTS

RIGHT HAND THREADS

USED WITH 380092 RIGHT HAND NUT

2 REQ. FOR RANGE TRANSMISSION, 3 REQ. FOR SPEED TRANSMISSION

INCLUDES: MISC. PLUGS AND GASKET
FILLER TUBE NOT INCLUDED

MADE IN USA

FOR RANGE TRANSMISSION

FOR RANGE TRANSMISSION
MADE IN USA

Required: 2

RING GEAR & PINION / DIFFERENTIAL

TOP COVER PRESSURE PORT

OPTION FOR 386867 O-RING

FOR TA INSTALLATION
INCLUDES: 393877 MCV OVERHAUL KIT
FEDERAL MOGUL IPTO SEALS

SPLIT O-RING
1 1/2" ID

MCV OVERHAUL KIT; INCLUDES: MCV GASKETS, SPRING KIT & O-RING KIT
FOR TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED
DOES NOT FIT FACTORY NON-TA TRACTORS.

.015 THICK

.023 THICK

FOR TA SELECTOR VALVE

FITS TRACTORS WITH TA

FITS TA HOUSING OR FACTORY NON-TA BEARING CAGE

FRONT/OUTER
FITS TRACTORS WITH OR WITHOUT TA

FEDERAL MOGUL FRONT/OUTER IPTO SEAL
FITS TRACTORS WITH OR WITHOUT TA

FRONT/OUTER
FITS TRACTORS WITH OR WITHOUT TA
DOUBLE SHELL SEAL

INNER
FITS TRACTORS WITH OR WITHOUT TA

FEDERAL MOGUL REAR / INNER IPTO SEAL
FITS TRACTORS WITH OR WITHOUT TA

CONVERTS FROM OEM PISTON TO GEAR PUMP KIT
INCLUDES: PUMP
MAY ALSO REQUIRE USE OF 830616

PUMP ONLY
INCLUDES: MOUNTING GASKET
REPLACEMENT PUMP FOR TRACTORS WITH GEAR TYPE PUMP CONVERSION KIT ALREADY INSTALLED

2500 PSI STEERING RELIEF VALVE

2 1/2" - 12 MALE O-RING x 1 7/8" - 12 FEMALE O-RING
BUSHING IS REQUIRED IF FILTER HOUSING HAS NOT BEEN UPDATED TO SMALLER 1 7/8" - 12 HOSE FITTING SIZE

MCV OVERHAUL KIT; INCLUDES: MCV GASKETS, SPRING KIT & O-RING KIT
FOR TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED
DOES NOT FIT FACTORY NON-TA TRACTORS.

.015 THICK

.023 THICK

FOR TA SELECTOR VALVE

THIS KIT REPLACES THE 1263450 AXIAL PISTON PUMP
KIT INCLUDES: NEW PUMP DRIVE GEAR, FILTER SCREEN, ADAPTER BLOCK & MOUNTING PLATE & ALL HOSES, VALVES, FITTINGS, GASKETS, AND INSTRUCTIONS NEEDED FOR CONVERSION
KIT DOES NOT INCLUDE HYDRAULIC PUMP
PUMP PART NUMBER'S 70931 NEW (12 GPM), 70932 NEW (15 GPM), OR 70935 NEW (17 GPM) ARE AVAILABLE AND MUST BE ORDERED SEPARATELY

THIS KIT REPLACES THE 1263450 AXIAL PISTON PUMP
KIT INCLUDES: NEW PUMP DRIVE GEAR, FILTER SCREEN, ALL HOSES, VALVES, FITTINGS, GASKETS, AND INSTRUCTIONS NEEDED FOR CONVERSION
KIT DOES NOT INCLUDE HYDRAULIC PUMP, PUMP MOUNTING FLANGE & ADAPTER BLOCK.
PUMP PART NUMBER'S 70931 NEW (12 GPM), 70932 NEW (15 GPM), OR 70935 NEW (17 GPM) ARE AVAILABLE AND MUST BE ORDERED SEPARATELY

WITH NUT, KEY & O-RINGS

W/NUT, KEY AND O-RINGS
NOT COMPATIBLE WITH PIGGY BACK PUMP

2500 PSI
FOR TRACTORS THAT HAVE HAD PPH SYSTEM CONVERTED TO OPEN CENTER HYDRAULIC SYSTEM

FITS: 7031, 70932, 70933 & 70935

FITS: 70931 NEW, 70932 NEW, 70933 NEW & 70935 NEW

HITCH PUMP GASKET

OPTION FOR 386867 O-RING

OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK, BRAKE PISTONS.
FOR UNITS WITH HYDRAULIC BRAKES

OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK, BRAKE PISTONS.
FOR UNITS WITH HYDRAULIC BRAKES

OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK.
DOES NOT INCLUDE BRAKE PISTONS
FOR UNITS WITH HYDRAULIC BRAKES

OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK.
DOES NOT INCLUDE BRAKE PISTONS
FOR UNITS WITH HYDRAULIC BRAKES

COMPLETE GASKET, O-RING & SEAL PACKAGE
FOR UNITS WITH HYDRAULIC BRAKES

COMPLETE GASKET, O-RING & SEAL PACKAGE
FOR UNITS WITH HYDRAULIC BRAKES

GASKET & O-RING PACKAGE
FOR CLUTCH DRUM SERVICE ONLY

INCLUDES: CAST CLUTCH DRUM SEAL RINGS

CONTAINS: 12 STEEL PLATES & 5 FIBER PLATES

CONTAINS: 12 STEEL PLATES & 5 FIBER PLATES

CONTAINS: 9 STEEL PLATES & 7 FIBER PLATES

CONTAINS: 9 STEEL PLATES & 7 FIBER PLATES

CONTAINS: 10 INTERNAL TOOTH & 10 EXTERNAL TOOTH FRICTION PLATES

FOR USE WITH HYDRAULIC BRAKES

FITS UNITS WITH HYDRAULIC APPLIED BRAKES

PTO CLUTCH DRUM RETAINING SNAP-RING

PTO UNIT TO TRACTOR

(NEW AVAILABLE)
Required: 3

TEFLON CLUTCH DRUM SEAL RING

CAST CLUTCH DRUM SEAL RING
HD OPTION FOR 381485

CLUTCH DRUM TO SHAFT O-RING

CLUTCH PISTON INNER O-RING

PTO CLUTCH FRICTION DISC
Required: 5 FOR OEM CLUTCH PACK OR 7 FOR HEAVY DUTY CLUTCH PACK

HD OPTION FOR 381490
Required: 5 FOR OEM CLUTCH PACK OR 7 FOR HEAVY DUTY CLUTCH PACK

51 INTERNAL TEETH WITH FRICTION MATERIAL ON 1 SIDE
CAN ONLY BE USED WITH 1863971

6 EXTERNAL TABS WITH FRICTION MATERIAL ON 1 SIDE
CAN ONLY BE USED WITH 1863972

INCLUDES: HUB, 8 FIN IMPELLER & MOUNTING GASKET

INCLUDES: DRIVE GEAR, THRUST PLATE & 12 NEW 1" LIFTERS

INCLUDES: DRIVE GEAR, THRUST PLATE & 12 NEW 1 1/8" LIFTERS

INCLUDES: DRIVE GEAR AND THRUST PLATE; ORDER LIFTERS

W/O GEAR, ORDER LIFTERS SEPARATELY

1 1/8"
Required: 12

1"
Required: 12

FOR INSTALLATION OF 1809964 REAR MAIN SEAL

CONTAINS 7 STEEL PLATES, 6 FRICTION DISCS, O-RINGS AND GASKET
Required: 1 PER SIDE

GLYCERIN FILLED
USED TO CHECK TA LUBE PRESSURE

GLYCERIN FILLED
USED TO CHECK TA CLUTCH PRESSURE

USED TO CHECK FOR SUMP CHECK VALVE LEAKAGE

FOR INSTALLATION OF 1809964 REAR MAIN SEAL

REQ. FOR INSTALLATION OF 528707 RING GEAR/PINION AND 120265 RING GEAR/PINION UPDATE KIT

REQ. WHEN ORDERING PART NUMBER 9203

WITH FLARE ADAPTERS

HD 3 SPEED 12 VOLT DUAL MOTOR ASSEMBLY, CFM-696 FOR REPLACEMENT MOTORS ORDER BM3904, USES ORIGINAL WIRE CONNECTION

CAN ORDER 6 PACK - 320-143481-6

4" X 7 3/4" MALE AND FEMALE O-RING, FRONT MOUNT.
CAN USE HEAVY DUTY DRY-TECH SERIES 804-545.