JOHN DEERE 400 John Deere Models: 105 thru 595

FLYWHEEL STEP: FLAT

GREASABLE

INTERCHANGEABLE WITH D1163702
FLYWHEEL STEP: FLAT

INTERCHANGEABLE WITH D1145308
FLYWHEEL STEP: FLAT

INTERCHANGEABLE WITH 328 0061 10 & 328 0061 11

NEW LUK,
SPRING CENTER,
INTERCHANGEABLE WITH R66923

NEW LUK
INTERCHANGEABLE W/R66923

GREASABLE

INCLUDES:PPA, 6 PAD ENGINE DISC AND WOVEN PTO DISC;
INTERCHANGEABLE WITH R55140U;
FLYWHEEL STEP: 2.200" - 2.210"

INCLUDES:PPA, 6 PAD ENGINE DISC AND WOVEN PTO DISC;
INTERCHANGEABLE WITH R27706U;
FLYWHEEL STEP: 2.200" - 2.210"

NEW LUK;
INCLUDES: WOVEN PTO DISC;
INTERCHANGEABLE WITH R55140 & R27706;
FLYWHEEL STEP: 2.200" - 2.210"

INTERCHANGEABLE WITH R55140 AND 228 0023 10,
INCLUDES: WOVEN PTO DISC,
FLYWHEEL STEP 2.200" - 2.210",
(NEW AVAILABLE)

INCLUDES: WOVEN PTO DISC,
FLYWHEEL STEP 2.200" - 2.210"

INCLUDES: WOVEN PTO DISC;
INTERCHANGEABLE WITH 228 0023 10 & R27706;
FLYWHEEL STEP: 2.200" - 2.210"

INTERCHANGEABLE WITH 328 0061 10 & 328 0061 11

NEW LUK;
INTERCHANGEABLE WITH R66923

NEW LUK;
INTERCHANGEABLE WITH R66923

INTERCHANGEABLE WITH 323 0084 10

FITS: R55140 PPA
INCLUDES: 3-CAST STYLE RELEASE LEVERS, 3-LEVER SPRINGS, 3-LEVER PINS, 3-PUSH PINS, 6-LEVER PIN CLIPS & 3-ROLL PINS
**NOTE: WHEN REPLACING STAMPED STEEL LEVERS THE PTO RELEASE PIN GUIDES ON THE BACKPLATE BELOW THE LEVERS MUST BE MACHINED DOWN FROM .550" TO .080" ABOVE BACKPLATE.

GREASEABLE;
SELF CENTERING BEARING WITH CARRIER

GREASEABLE

BEARING WITH CAST IRON CARRIER

23CM (1.38 CI) HYDRAULIC PUMP WITH KEYED SHAFT

THIS IS A 50 CM (3 CI) HYDRAULIC PUMP
THIS PUMP HAS A 1 1/16" INLET PORT ON THE MOUNTING FLANGE LEFT SIDE , A 7/8" PRESSURE PORT IN THE PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON THE BOTTOM. IT DOES NOT HAVE AN INLET PORT ON THE MOUNTING FLANGE RIGHT SIDE.
NOTE: THE INDICATED SIDES OF PUMP ARE AS SEEN FROM THE TRACTOR SEAT.
IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED.

THIS IS A 50 CM (3 CI) HYDRAULIC PUMP. IT HAS A 1 1/16" INLET PORT ON MOUNTING FLANGE LEFT SIDE , A 1 5/8" INLET PORT ON MOUNTING FLANGE RIGHT SIDE, A 1 1/16" PRESSURE PORT IN PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON BOTTOM. THE SIDES OF THE PUMP NOTED ARE AS SEEN FROM THE TRACTOR SEAT
NOTE: WILL SUB FOR R56160 USING DIFFERENT FITTINGS. IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED

23CM (1.38 CI) HYDRAULIC PUMP WITH KEYED SHAFT;
(NEW AVAILABLE)

USE WITH R79152, R79154 & R79156 SHAFTS

USE WITH R79152, R79154 & R79156 SHAFTS

USE WITH R34348 SHAFT

USE WITH R34348 SHAFT AND
USE WITH R45874B & R45874BR BUSHINGS
Required: 2

USE WITH R79152, R79154 & R79156 SHAFTS
USE WITH R80558B & R80558BR BUSHINGS
Required: 2

USE WITH R79152, R79154, R79156 & R34348 SHAFTS
Required: 2

THIS IS A 50 CM (3 CI) HYDRAULIC PUMP. IT HAS A 1 1/16" INLET PORT ON MOUNTING FLANGE LEFT SIDE , A 1 5/8" INLET PORT ON MOUNTING FLANGE RIGHT SIDE, A 1 1/16" PRESSURE PORT IN PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON BOTTOM. THE SIDES OF THE PUMP NOTED ARE AS SEEN FROM THE TRACTOR SEAT
NOTE: WILL SUB FOR R56160 USING DIFFERENT FITTINGS. IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED

DISTRIBUTOR: PRESTOLITE

DISTRIBUTOR: PRESTOLITE

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 12V ELECTRICAL SYSTEM

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 12V ELECTRICAL SYSTEM

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 6V ELECTRICAL SYSTEM

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 6V ELECTRICAL SYSTEM