Humboldt, Iowa

Dealers

Stay logged in

JOHN DEERE 600 John Deere Models: 600 thru 990

HYDRAULIC PUMP & PARTS

Top of Page

HYDRAULIC PUMP

(R97872 NEW AVAILABLE);
THIS IS A 40 CM (2.4 CI) HYDRAULIC PUMP THIS PUMP HAS A 1 1/16" INLET PORT ON MOUNTING FLANGE LEFT SIDE , A 1 5/8" INLET PORT ON MOUNTING FLANGE RIGHT SIDE, A 1 1/16" PRESSURE PORT IN PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON BOTTOM. NOTE: IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED THE INDICATED SIDES OF THE PUMP ARE AS SEEN FROM THE TRACTOR SEAT

  • CORE #:GR97872
  • CORE PRICE:$150.00*

HYDRAULIC PUMP

THIS IS A 50 CM (3 CI) HYDRAULIC PUMP
THIS PUMP HAS A 1 1/16" INLET PORT ON THE MOUNTING FLANGE LEFT SIDE , A 7/8" PRESSURE PORT IN THE PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON THE BOTTOM. IT DOES NOT HAVE AN INLET PORT ON THE MOUNTING FLANGE RIGHT SIDE.
NOTE: THE INDICATED SIDES OF PUMP ARE AS SEEN FROM THE TRACTOR SEAT.
IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED.

  • CORE #:GR56160
  • CORE PRICE:$150.00*

HYDRAULIC PUMP

THIS IS A 40 CM (2.4 CI) HYDRAULIC PUMP
THIS PUMP HAS A 1 1/16" INLET PORT ON MOUNTING FLANGE LEFT SIDE , A 1 5/8" INLET PORT ON MOUNTING FLANGE RIGHT SIDE, A 1 1/16" PRESSURE PORT IN PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON BOTTOM.
NOTE: IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED
THE INDICATED SIDES OF THE PUMP ARE AS SEEN FROM THE TRACTOR SEAT

  • CORE #:GR97872
  • CORE PRICE:$150.00*

JD HYDRAULIC PUMP FITTING

1 1/16" MALE O-RING x 7/8" MALE JIC

JD HYDRAULIC PUMP FITTING

45 DEGREE HYDRAULIC PUMP FITTING 1 1/16" MALE O-RING x 7/8" MALE JIC

HYDRAULIC PUMP BUSHING W/ROLLERS

USE WITH R79152, R79154 & R79156 SHAFTS

HYDRAULIC PUMP BUSHING

USE WITH R79152, R79154 & R79156 SHAFTS

HYDRAULIC PUMP BUSHING

USE WITH R34348 SHAFT

HYDRAULIC PUMP THRUST WASHER

USE WITH R34348 SHAFT AND
USE WITH R45874B & R45874BR BUSHINGS
Required: 2

HYDRAULIC PUMP THRUST WASHER

USE WITH R79152, R79154 & R79156 SHAFTS
USE WITH R80558B & R80558BR BUSHINGS
Required: 2

HYDRAULIC PUMP BEARING

USE WITH R79152, R79154, R79156 & R34348 SHAFTS
Required: 2

ELECTRONIC IGNITION

Top of Page

ELECTRONIC IGNITION CONVERSION

DISTRIBUTOR: PRESTOLITE

  • DISTRIBUTOR MAKE:PRESTOLITE
  • VOLTS/GROUND:12V - NEG
  • CYLINDERS:4

ELECTRONIC IGNITION CONVERSION

DISTRIBUTOR: PRESTOLITE

  • DISTRIBUTOR MAKE:PRESTOLITE
  • VOLTS/GROUND:12V - POS
  • CYLINDERS:4

IGNITION COIL

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 12V ELECTRICAL SYSTEM

  • OHM:3.0
  • VOLTS:12

CHROME IGNITION COIL

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 12V ELECTRICAL SYSTEM

  • OHM:3.0
  • VOLTS:12

IGNITION COIL

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 6V ELECTRICAL SYSTEM

  • OHM:1.5
  • VOLTS:6

CHROME IGNITION COIL

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 6V ELECTRICAL SYSTEM

  • OHM:1.5
  • VOLTS:6

ENGINE PARTS

Top of Page

REAR MAIN SEAL

ONE PIECE TEFLON SEAL AND WEAR SLEEVE ASSEMBLY
SUB FOR AT22965, AR92893, RE11036, RE17831, RE24959

AG PARTS ONLINE
AP Air, INC.
AP Truck Parts
DKC_SOLUTIONS
ROMAINE ELECTRIC
Spencer Diesel

Shopping Cart Update Cart ()

Loading...