JOHN DEERE 3010 John Deere Models: 3005 thru 4995

KIT INCLUDES: PPA WITH WOVEN PTO DISC, WOVEN ENGINE DISC,PTO RELEASE BEARING, TRANSMISSION RELEASE BEARING & PILOT BEARING, FLYWHEEL STEP: 2.844" NO WARRANTY

KIT INCLUDES: PPA WITH WOVEN PTO DISC, NEW DESIGN SMOOTH ENGAGING 6 PAD CARBOTIC DISC, PTO RELEASE BEARING, TRANSMISSION RELEASE BEARING & PILOT BEARING. FLYWHEEL STEP: 2.844"

INCLUDES: PPA WITH WOVEN PTO DISC, NEW DESIGN SMOOTH ENGAGING 6 PAD CARBOTIC DISC, PTO RELEASE BEARING, AETNA TRANSMISSION RELEASE BEARING & PILOT BEARING. FLYWHEEL STEP: 2.844"

INCLUDES: PPA WITH 4 PAD PTO DISC, NEW DESIGN SMOOTH ENGAGING 6 PAD CARBOTIC DISC, PTO RELEASE BEARING, TRANSMISSION RELEASE BEARING & PILOT BEARING; FLYWHEEL STEP: 2.844"

INCLUDES: PPA WITH 4 PAD PTO DISC, NEW DESIGN SMOOTH ENGAGING 6 PAD CARBOTIC DISC, PTO RELEASE BEARING, AETNA TRANSMISSION RELEASE BEARING & PILOT BEARING; FLYWHEEL STEP: 2.844"

(R31311 NEW AVAILABLE); W/NEW CAST, INCLUDES: WOVEN PTO DISC, FLYWHEEL STEP: 2.844

INCLUDES: WOVEN PTO DISC, FLYWHEEL STEP: 2.844"

INCLUDES: 4 PAD PTO DISC, FLYWHEEL STEP 2.844"

NO WARRANTY ON WOVEN DISC OR PPA IF WOVEN USED.

GREASEABLE

NON-GREASABLE AETNA BEARING

DIESEL WITH SYNCHRO-RANGE
INCLUDES: RING GEAR & NEW DOWEL PINS

DIESEL WITH SYNCHRO-RANGE
INCLUDES: RING GEAR

FITS GAS AND DIESEL FLYWHEELS - MODELS WITH SYNCRO-RANGE TRANSMISSION

WITH ROUND DRIVE PINS

WITH 11" DISC AND SQUARE DRIVE PINS

FITS WITH R26835 FRONT PTO PLATE

FITS: R41342 FRONT PTO PLATE

FITS WITH R26835 FRONT PTO PLATE, (R33569 NEW AVAILABLE)

FITS: R41342 FRONT PTO PLATE
(NEW AVAILABLE)

FITS: R41342 FRONT PTO PLATE
CHECK CASTING NUMBERS BEFORE ORDERING

FITS: R33569 BOTTOM CAST PLATE, (R26835 NEW AVAILABLE)

FITS: R51392 OR R41341 BOTTOM CAST PLATE
FOR USE IN ALL 3000 SERIES
CHECK CASTING NUMBERS BEFORE ORDERING
(NEW AVAILABLE)

REQUIRES 3/8" ADJ BOLT R26804
CHECK CASTING NUMBERS BEFORE ORDERING
(NEW AVAILABLE)

REQUIRES 3/8" ADJ BOLT R26804, WILL INTERCHANGE WITH R41343

FITS: R51392 OR R41341 BOTTOM CAST PLATE
FOR USE IN ALL 3000 SERIES
CHECK CASTING NUMBERS BEFORE ORDERING

REQUIRES 3/8" ADJ BOLT R26804
CHECK CASTING NUMBERS BEFORE ORDERING

INCLUDES: 3 TRANSMISSION LEVERS, PINS AND ANTI-RATTLE SPRINGS AND 3 PTO LEVERS AND PINS

INCLUDES: 15 INNER & 15 OUTER PRESSURE SPRINGS AND 3 PTO RETURN SPRINGS

TRANSMISSION INNER PRESSURE SPRING
Required: 12

TRANSMISSION OUTER PRESSURE SPRING

PTO PLATE RETURN SPRING

TRANSMISSION LEVER SPRING

TRANSMISSION

TRANSMISSION

TRANSMISSION
Required: 3

PTO; 3/8" 24 THREAD

7/16" 20 THREAD
Required: 3

THIS IS A 40 CM (2.4 CI), EARLY - STRAIGHT SIDE HYDRAULIC PUMP WITH PRESSURE ADJUSTMENT FITTING ON TOP
THIS PUMP HAS A 1 1/16" INLET PORT ON THE MOUNTING FLANGE LEFT SIDE , A 7/8" PRESSURE PORT IN THE PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON THE BOTTOM.
NOTE: IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED
THE INDICATED SIDES OF PUMP ARE AS SEEN FROM THE TRACTOR SEAT

(R97872 NEW AVAILABLE);
THIS IS A 40 CM (2.4 CI) HYDRAULIC PUMP THIS PUMP HAS A 1 1/16" INLET PORT ON MOUNTING FLANGE LEFT SIDE , A 1 5/8" INLET PORT ON MOUNTING FLANGE RIGHT SIDE, A 1 1/16" PRESSURE PORT IN PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON BOTTOM. NOTE: IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED THE INDICATED SIDES OF THE PUMP ARE AS SEEN FROM THE TRACTOR SEAT

THIS IS A 50 CM (3 CI) HYDRAULIC PUMP
THIS PUMP HAS A 1 1/16" INLET PORT ON THE MOUNTING FLANGE LEFT SIDE , A 7/8" PRESSURE PORT IN THE PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON THE BOTTOM. IT DOES NOT HAVE AN INLET PORT ON THE MOUNTING FLANGE RIGHT SIDE.
NOTE: THE INDICATED SIDES OF PUMP ARE AS SEEN FROM THE TRACTOR SEAT.
IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED.

THIS IS A 40 CM (2.4 CI) HYDRAULIC PUMP THIS PUMP HAS A 1 1/16" INLET PORT ON MOUNTING FLANGE LEFT SIDE , A 1 5/8" INLET PORT ON MOUNTING FLANGE RIGHT SIDE, A 1 1/16" PRESSURE PORT IN PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON BOTTOM. NOTE: IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED THE INDICATED SIDES OF THE PUMP ARE AS SEEN FROM THE TRACTOR SEAT

1 1/16" MALE O-RING x 7/8" MALE JIC

45 DEGREE HYDRAULIC PUMP FITTING 1 1/16" MALE O-RING x 7/8" MALE JIC

USE WITH R79152, R79154 & R79156 SHAFTS

USE WITH R79152, R79154 & R79156 SHAFTS

USE WITH R34348 SHAFT

USE WITH R34348 SHAFT AND
USE WITH R45874B & R45874BR BUSHINGS
Required: 2

USE WITH R79152, R79154 & R79156 SHAFTS
USE WITH R80558B & R80558BR BUSHINGS
Required: 2

USE WITH R79152, R79154, R79156 & R34348 SHAFTS
Required: 2

DISTRIBUTOR: DELCO
FITS: DISTRIBUTORS WITH CLIP ON CAP
CW ROTATION

DISTRIBUTOR: DELCO
DISTRIBUTORS WITH CLIP ON CAP
CW ROTATION

DISTRIBUTOR: DELCO
DISTRIBUTORS WITH CLIP ON CAP
CW ROTATION

DISTRIBUTOR: DELCO
CLIP ON CAP
CCW ROTATION

DISTRIBUTOR: DELCO
DISTRIBUTOR # 1112577
CLIP ON CAP
CCW ROTATION

DISTRIBUTOR: DELCO
FITS: DISTRIBUTORS WITH SCREW ON CAP
CCW ROTATION

DISTRIBUTOR: DELCO
FITS: DISTRIBUTORS WITH SCREW ON CAP
CCW ROTATION

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 12V ELECTRICAL SYSTEM

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 12V ELECTRICAL SYSTEM

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 6V ELECTRICAL SYSTEM

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 6V ELECTRICAL SYSTEM

INCLUDES: HUB AND MOUNTING GASKET

INCLUDES: MOUNTING GASKET, R940210 KIT AVAILABLE

INCLUDES: MOUNTING GASKET
R940210 KIT AVAILABLE

UNIVERSAL FITS ALL GAS MODELS
INCLUDES: HUB & MOUNTING GASKET
R940210 KIT AVAILABLE

FITS: R34981, R41317, R44116, R41313 & R45330
INCLUDES: GASKET, SPRING SEAL & BEARING

SEAL INSTALLER FOR THE INSTALLATION OF UNITIZED WATER PUMP SEALS

INCLUDES: HUB, BACKPLATE, BACKPLATE GASKET, AND MOUNTING GASKET, R933010 KIT AVAILABLE

INCLUDES: HUB, BACKPLATE, BACKPLATE GASKET, AND MOUNTING GASKET

INCLUDES: MOUNTING GASKET, R935010 KIT AVAILABLE

INCLUDES: MOUNTING GASKET

UNIVERSAL FITS ALL DIESEL MODELS EXCEPT R41316 INCLUDES: HUB, BACKPLATE, BACKPLATE GASKET & MOUNTING GASKET R934020 KIT AVAILABLE (NEW AVAILABLE)

FITS: R26337
INCLUDES: 2 GASKETS, SPRING SEAL & BEARING

FITS: R34982 & R45332
INCLUDES: 2 GASKETS, SPRING SEAL & BEARING

SEAL INSTALLER FOR THE INSTALLATION OF UNITIZED WATER PUMP SEALS

FOR INSTALLATION OF R22764 REAR MAIN SEAL

3/16" X 31/64"-18 PER SET

3/16" X 43/64"- 18 PER SET

3/16" X 1 11/32" - 18 PER SET

FOR INSTALLATION OF R22764 REAR MAIN SEAL

SYNCRO-RANGE TRANSMISSION