CASE-IH 7220 Case-IH Models: 4210 thru 9390

REMAN WITH 6 MOUNTING HOLES

WITH 6 MOUNTING HOLES

COUNTERSHAFT;
INCLUDES: 13 - 86990276 FRICTION DISCS, 12 - 92934 SEPARATOR PLATES, SEALS & O-RINGS

RANGE TRANSMISSION MASTER CLUTCH;
INCLUDES: 9 - 1285975C1 FRICTION DISCS, 9 - 1285974C1 SEPARATOR PLATES, SEALS & O-RINGS

OUTPUT SHAFT/FRONT CLUTCH
INCLUDES: 10 - FRICTION DISCS, 8 - SEPARATOR PLATES, SEALS & O-RINGS

OUTPUT SHAFT/REAR CLUTCH
INCLUDES: 14 - FRICTION DISCS, 12 - SEPARATOR PLATES, SEALS & O-RINGS

INCLUDES: GASKET, O-RING & SEAL KIT

COUNTER SHAFT

OUTPUT SHAFT/REAR CLUTCH

INPUT SHAFT W/O CREEPER;
INCLUDES: 10-86990276 FRICTION DISCS, 8-92934 SEPARATOR PLATES & O-RINGS

COUNTERSHAFT W/ CREEPER;
INCLUDES: 8-86990276 FRICTION DISCS, 7-92934 SEPARATOR PLATES & O-RINGS

INPUT SHAFT

INPUT SHAFT

OUTPUT SHAFT

CONTROL VALVE MOUNTING PLATE TO CLUTCH HOUSING GASKET

CONTROL VALVE BODY TO MOUNTING PLATE GASKET

CONTROL VALVE BODY TO BODY PLATE GASKET

CONTROL VALVE BODY TO CAM HOUSING GASKET

CLUTCH CONTROL VALVE STEM HOUSING GASKET

CREEPER VALVE / LOWER PLATE HOUSING GASKET

FORWARD / REVERSE SPOOL HOUSING

SMALL OUTER COVER PLATE GASKET ON CAM HOUSING

LARGE OUTSIDE COVER PLATE GASKET ON CAM HOUSING

SHIFT / CAM SHAFT SEAL

FWD/REV SPOOL

CLUTCH CONTROL VALVE STEM

REPAIR SLEEVE
FITS OVER ORIGINAL AXLE SLEEVE, REQUIRES USE OF 1349183C1 OVERSIZED SEAL
FITS TRACTORS WITH 4" AXLES

OVERSIZED AXLE SEAL, USE WITH 1349184C1 REPAIR SLEEVE
FITS TRACTORS WITH 4" AXLES

ORIGINAL SIZE SEAL
USE WITH ORIGINAL AXLE SEAL SLEEVE 1963837C1
FITS TRACTORS WITH 4" AXLES

INCLUDES: GASKETS, SEALS, NEW BRAKE PISTONS & HD CLUTCH PACK

INCLUDES: GASKETS, SEALS & HD CLUTCH PACK

INCLUDES: GASKETS, SEALS & O-RINGS

CONTAINS: 8 SEPARATOR PLATES AND 8 FIBER DISCS

CONTAINS 8 SEPARATOR PLATES AND 8 FIBER DISCS, HEAVY DUTY OPTION FOR 1277394

CONTAINS: 10 INTERNAL TOOTH & 10 EXTERNAL TOOTH FRICTION PLATES

(NEW AVAILABLE)
Required: 3

PTO CLUTCH FRICTION DISC
Required: 8

HD OPTION FOR 381490
Required: 8

540 AND 1000 RPM OUTPUT SHAFT SEAL

TEFLON CLUTCH DRUM SEAL RING

CAST CLUTCH DRUM SEAL RING
HD OPTION FOR 381485

TEFLON CLUTCH SHAFT TO BACKPLATE

TEFLON CLUTCH DRUM TO SHAFT

TEFLON CLUTCH DRUM TO SHAFT

CLUTCH DRUM TO SHAFT O-RING

CLUTCH PISTON INNER O-RING

FOR ALL MODELS W/DUAL SPEED PTO

FOR 1000 RPM SHAFT

FOR 540 RPM SHAFT

540 OUTPUT SHAFT FRONT BEARING - DUAL SPEED ONLY

51 INTERNAL TEETH WITH FRICTION MATERIAL ON 1 SIDE
CAN ONLY BE USED WITH 1863971

6 EXTERNAL TABS WITH FRICTION MATERIAL ON 1 SIDE
CAN ONLY BE USED WITH 1863972

ELIMINATES DRAFT SENSING COMPUTER, BUT WILL NOT DETECT DEFECTIVE PINS

ALLOWS TRACTOR TO HAVE FULL DRAFT SENSING IF ONLY 1 PIN IS WORKING

INCLUDES: PULLEY AND MOUNTING O-RING
(NEW AVIALABLE)

INCLUDES: PULLEY AND MOUNTING O-RING

FOR INSTALLATION OF A77810 REAR MAIN SEAL 5.9 & 8.3 CUMMINS ENGINE

INCLUDES: 3-120486 SEPARATOR PLATES, 3-120488 BRAKE DISCS, 1-139189 RETURN PLATE

W/MECHANICAL FRONT WHEEL DRIVE
Required: 1 PER SIDE

SEALS ONLY, DOES NOT CONTAIN BUSHING\
Required: 1 PER SIDE

STEERING CLYINDER UPGRADE KIT
FITS: MFD TRACTORS WITH ORIGINAL CYLINDERS

FITS: ORIGINAL MFD STEERING CYLINDERS THAT HAVE NOT HAD UPGRADED CYL KIT INSTALLED

INCLUDES: 10 BOLT HUB SEAL, SUNSHAFT SEAL & BUSHING KIT

FOR INSTALLATION OF A77810 REAR MAIN SEAL 5.9 & 8.3 CUMMINS ENGINE

CAN ORDER 6 PACK - 320-143481-6

5/8" HOSE MANUAL ON/OFF HEATER HOSE VALVE WITH 3/8" MALE PIPE THREAD;
FOR 5/8" HOSE

INCLUDES: OE SNADEN COMPRESSOR, RECEIVER DRIER, EXPANSION VALVE & O-RINGS
CAN USE ALTERNATIVE SANDEN KIT - 890-56013

4" X 7 3/4" MALE AND FEMALE O-RING, FRONT MOUNT.
CAN USE HEAVY DUTY DRY-TECH SERIES 804-545.

CAN USE OE SANDEN COMPRESSOR - 509-560