REMAN WITH 6 MOUNTING HOLES
WITH 6 MOUNTING HOLES
INPUT SHAFT; INCLUDES: 20 - 86990276 FRICTION DISCS, 18 - 92934 SEPARATOR PLATES, SEALS & O-RINGS
COUNTERSHAFT; INCLUDES: 15 - 86990276 FRICTION DISCS, 14 - 92934 SEPARATOR PLATES, 1-87738316 SEPARATOR PLATE, SEALS & O-RINGS
RANGE TRANSMISSION MASTER CLUTCH; INCLUDES: 9 - 1285975C1 FRICTION DISCS, 9 - 1285974C1 SEPARATOR PLATES, SEALS & O-RINGS
INCLUDES: GASKET, O-RING & SEAL KIT
INPUT SHAFT
COUNTER SHAFT
INPUT SHAFT W/O CREEPER; INCLUDES: 10-86990276 FRICTION DISCS, 8-92934 SEPARATOR PLATES & O-RINGS
COUNTERSHAFT W/ CREEPER; INCLUDES: 8-86990276 FRICTION DISCS, 7-92934 SEPARATOR PLATES & O-RINGS
OUTPUT SHAFT FRONT CLUTCH; INCLUDES: 14-86990276 FRICTION DISCS, 12-92934 SEPARATOR PLATES & O-RINGS
OUTPUT SHAFT REAR CLUTCH; INCLUDES: 18-86990276 FRICTION DISCS, 16-92934 SEPARATOR PLATES & O-RINGS
OUTPUT SHAFT
CONTROL VALVE MOUNTING PLATE TO CLUTCH HOUSING GASKET
CONTROL VALVE BODY TO MOUNTING PLATE GASKET
CONTROL VALVE BODY TO BODY PLATE GASKET
CONTROL VALVE BODY TO CAM HOUSING GASKET
CLUTCH CONTROL VALVE STEM HOUSING GASKET
CREEPER VALVE / LOWER PLATE HOUSING GASKET
FORWARD / REVERSE SPOOL HOUSING
SMALL OUTER COVER PLATE GASKET ON CAM HOUSING
LARGE OUTSIDE COVER PLATE GASKET ON CAM HOUSING
SHIFT / CAM SHAFT SEAL
FWD/REV SPOOL
CLUTCH CONTROL VALVE STEM
REPAIR SLEEVE FITS OVER ORIGINAL AXLE SLEEVE, REQUIRES USE OF 1349183C1 OVERSIZED SEAL FITS TRACTORS WITH 4" AXLES
OVERSIZED AXLE SEAL, USE WITH 1349184C1 REPAIR SLEEVE FITS TRACTORS WITH 4" AXLES
ORIGINAL AXLE SEAL SLEEVE REQUIRES THE USE OF 1963839C1 SEAL FITS TRACTORS WITH 4" AXLES
ORIGINAL SIZE SEAL USE WITH ORIGINAL AXLE SEAL SLEEVE 1963837C1 FITS TRACTORS WITH 4" AXLES
INCLUDES: GASKETS, SEALS, NEW BRAKE PISTONS & HD CLUTCH PACK
INCLUDES: GASKETS, SEALS & HD CLUTCH PACK
INCLUDES: GASKETS, SEALS & O-RINGS
CONTAINS: 8 SEPARATOR PLATES AND 8 FIBER DISCS
CONTAINS 8 SEPARATOR PLATES AND 8 FIBER DISCS, HEAVY DUTY OPTION FOR 1277394
CONTAINS: 10 INTERNAL TOOTH & 10 EXTERNAL TOOTH FRICTION PLATES
(NEW AVAILABLE) Required: 3
PTO CLUTCH FRICTION DISC Required: 8
HD OPTION FOR 381490 Required: 8
540 AND 1000 RPM OUTPUT SHAFT SEAL
CAST CLUTCH DRUM SEAL RING HD OPTION FOR 381485
TEFLON CLUTCH SHAFT TO BACKPLATE
TEFLON CLUTCH DRUM TO SHAFT
CLUTCH DRUM TO SHAFT O-RING
CLUTCH PISTON INNER O-RING
CONTAINS: 10 SEPARATOR PLATES AND 10 FRICTION DISCS
CONTAINS 10 SEPARATOR PLATES AND 10 FRICTION DISCS, HEAVY DUTY OPTION FOR 1277395
(NEW AVAILABLE) Required: 4
PTO CLUTCH FRICTION DISC Required: 10
HD OPTION FOR 381490 Required: 10
6 EXTERNAL TABS WITH FRICTION MATERIAL ON 1 SIDE CAN ONLY BE USED WITH 1863972
51 INTERNAL TEETH WITH FRICTION MATERIAL ON 1 SIDE CAN ONLY BE USED WITH 1863971
TEFLON CLUTCH DRUM SEAL RING
FOR ALL MODELS W/DUAL SPEED PTO
FOR 1000 RPM SHAFT
FOR 540 RPM SHAFT
540 OUTPUT SHAFT FRONT BEARING - DUAL SPEED ONLY
ELIMINATES DRAFT SENSING COMPUTER, BUT WILL NOT DETECT DEFECTIVE PINS
ALLOWS TRACTOR TO HAVE FULL DRAFT SENSING IF ONLY 1 PIN IS WORKING
INCLUDES: PULLEY AND MOUNTING O-RING (NEW AVIALABLE)
INCLUDES: PULLEY AND MOUNTING O-RING
FOR INSTALLATION OF A77810 REAR MAIN SEAL 5.9 & 8.3 CUMMINS ENGINE
INCLUDES: 4-120486 SEPARATOR PLATES, 4-120488 BRAKE DISCS, 1-139189 RETURN PLATE Required: 1 PER SIDE
W/MECHANICAL FRONT WHEEL DRIVE Required: 1 PER SIDE
SEALS ONLY, DOES NOT CONTAIN BUSHING\ Required: 1 PER SIDE
STEERING CLYINDER UPGRADE KIT FITS: MFD TRACTORS WITH ORIGINAL CYLINDERS
FITS: ORIGINAL MFD STEERING CYLINDERS THAT HAVE NOT HAD UPGRADED CYL KIT INSTALLED
INCLUDES: 10 BOLT HUB SEAL, SUNSHAFT SEAL & BUSHING KIT
CAN ORDER 6 PACK - 320-143481-6
5/8" HOSE MANUAL ON/OFF HEATER HOSE VALVE WITH 3/8" MALE PIPE THREAD; FOR 5/8" HOSE
INCLUDES: OE SNADEN COMPRESSOR, RECEIVER DRIER, EXPANSION VALVE & O-RINGS CAN USE ALTERNATIVE SANDEN KIT - 890-56013
CAN USE OE SANDEN COMPRESSOR - 509-603
4" X 7 3/4" MALE AND FEMALE O-RING, FRONT MOUNT. CAN USE HEAVY DUTY DRY-TECH SERIES 804-545.
CAN USE ORIGINAL JD VERSION 804-5502. CAN USE HEAVY DUTY DRY-TECH VERSION 804-550.
CAN USE OE SANDEN COMPRESSOR - 509-560